Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g03111736 |
Right side view of engine |
Show/hide table
Illustration 2 | g03111416 |
Bolt tightening sequence |
Show/hide table
Specification for 144-2888 Air Lines Gp | |||
Item | Qty | Part | Specification description |
1 | 4 | 6V-3917 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
2 | 6 | 9F-2773 Bolt | Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:
1. Assemble the seals to the aftercooler core. 2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal. 3. Assemble the aftercooler with seals to the inlet manifold. 4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess. 5. Install the aftercooler cover. 6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess. 7. Install the cover bolts. Hand tighten the cover bolts. 8. Tighten the bolts in a numerical sequence as shown in Illustration 2 to 9. Again, tighten the bolts in a numerical sequence that is shown in Illustration 2 to 10. Remove the tape. |
3 | 8 | 6V-5101 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
4 | 2 | 3J-5389 Plug | Before assembly, apply Loctite C5A Copper anti-seize to the threads.
Torque to |
5 | 4 | 6V-5103 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
C7.1 Industrial Engine Before Starting Engine
3500 Generator Set Engines Exhaust Manifold
3500B Generator Set Engines Auxiliary Water Pump - Sea Water
TH48-E80 Petroleum Transmission Selector and Pressure Control Valve (Transmission)
TH48-E70 Petroleum Transmission Reference Material
TH48-E70 Petroleum Transmission Breather (Transmission) - Clean
TH48-E80 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
3500 Generator Set Engines Turbocharger
TH48-E80 Petroleum Transmission Operational Checks
TH48-E80 Petroleum Transmission General Troubleshooting Information
TH48-E80 Petroleum Transmission Machine Preparation for Troubleshooting
TH48-E80 Petroleum Transmission Relief Valve (Transmission Lubrication)
3500 Engines for Caterpillar Built Generator Sets Flexible Coupling
Installation of the 291-7758 Medium Pressure Wiring {1408} Installation of the 291-7758 Medium Pressure Wiring {1408}
G3500 A3 Engines Camshaft Bearing Position
3500 Generator Set Engines Gear Group (Rear)
3500B Generator Set Engines Engine Oil Lines
3500 Industrial Engines Piston and Rings
3512B and 3516B Engines Air Inlet and Exhaust Lines
3500B and 3500C Marine Engines Exhaust Manifold
3500B Generator Set Engines Air Inlet and Exhaust Lines
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030} Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM)