Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g03113497 |
|
Right side view | |
Show/hide table
| |
| Illustration 2 | g03113516 |
|
Front view | |
Show/hide table
| Specification for 115-7860 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 0S-1594 Bolt | Use the following tightening sequence for the clamp bolts:
1. Snugly tighten the clamp assembly (2) to the tube assembly (4). 2. Tighten the bolts (3) of the clamp assembly to the 7N-5413 Elbow (8) to 3. Tighten the bolts (1) of the clamp assembly to the tube assembly (4) to |
| 2 | 2 | 100-8075 Clamp As | |
| 3 | 2 | 0S-1571 Bolt | |
| 4 | 1 | 1N-3333 Tube | |
| 5 | 6 | 109-2332 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 6 | 1 | 6V-4589 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 7 | 1 | 2W-1053 Plug | Torque to |
| 9 | 1 | 5P-7817 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
| 10 | 1 | 6V-5048 O-Ring Seal | Lubricate the bore lightly with the lubricant that is being sealed. |
Caterpillar Information System:
3500 Generator Set Engines Gear Group (Rear)
G3500 A3 Engines Camshaft Bearing Position
Installation of the 291-7758 Medium Pressure Wiring {1408} Installation of the 291-7758 Medium Pressure Wiring {1408}
3500 Engines for Caterpillar Built Generator Sets Flexible Coupling
3500B Engines for Caterpillar Built Power Modules Air Inlet and Exhaust Lines
C7.1 Industrial Engine Before Starting Engine
3500 Generator Set Engines Exhaust Manifold
3500B Generator Set Engines Auxiliary Water Pump - Sea Water
TH48-E80 Petroleum Transmission Selector and Pressure Control Valve (Transmission)
TH48-E70 Petroleum Transmission Reference Material
TH48-E70 Petroleum Transmission Breather (Transmission) - Clean
TH48-E80 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
3500 Industrial Engines Piston and Rings
3512B and 3516B Engines Air Inlet and Exhaust Lines
3500B and 3500C Marine Engines Exhaust Manifold
3500B Generator Set Engines Air Inlet and Exhaust Lines
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030} Electrical Application and Installation Guide for Petroleum Transmissions{1400, 3030}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM)
2012/07/31 Proper Care of the Two-Stage Air Cleaner for Certain 3512C Petroleum Engines {1051, 1054}
C18 Marine Engine Refill Capacities
C15 and C18 Engines for China On-Highway Phase IV Engine Valve Lash - Inspect/Adjust
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Schematic
C9.3 Tier 4 Final Engines Fuel System Pressure - Test