Accessory Drive (Lower Left Hand)
Show/hide table
Illustration 1 | g03059939 |
Show/hide table
Specification for 199-3429 Accessory Drive Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 155-2307 Idler Gear As | Bore of 116-1365 Bearing after assembly is |
Installation depth of 116-1365 Bearing is |
|||
2 | 1 | 164-4995 Washer Assembly | Thickness of 164-4996 Thrust Washer is |
Protrusion of 7N-2047 Dowel is |
|||
3 | 1 | 199-2889 Idler Shaft | Diameter is |
4 | 2 | 259-4598 O-Ring Seal | Before assembly, lightly lubricate the bore with the fluid that is being sealed. |
5 | 2 | 7N-7539 Thrust Washer | Thickness is |
6 | 1 | 7N-5874 Auxiliary Drive Shaft | Diameter is |
Width of the groove for the thrust washer is |
|||
7 | 1 | 441-3369 Adapter As | Bore of 127-5400 Bushing after assembly is |
Installation depth of 127-5400 Bushing is |
Caterpillar Information System:
2012/05/28 A New Console Harness Assembly Is Available for Certain Excavators {1408}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117} Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
C18 Marine Engines Electric Starting Motor - Remove and Install
C18 Marine Engines Alternator - Remove and Install
C18 Marine Engines Crankshaft - Remove and Install
C18 Marine Engines Crankshaft Main Bearings - Remove and Install
C18 Marine Engines Connecting Rod Bearings - Remove and Install
C7.1 Industrial Engine Monitoring System - Engine Indicators and Aftertreatment Indicators
C18 Marine Engines Pistons and Connecting Rods - Remove and Install
C18 Marine Engines Piston Cooling Jets - Remove and Install
C18 Marine Engines Cylinder Liner - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
C1.5 and C2.2 Engines for Caterpillar Built Machines Clean Emissions Module
C18 Marine Engines Fuel Priming Pump - Remove and Install
C7.1 Industrial Engine Sensors and Electrical Components
C18 Marine Engines Fuel Filter Base - Remove and Install
C7.1-XQ200 Rental Generator Set Diesel Particulate Filter Regeneration
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (Earlier) - Replace
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Maintenance Interval Schedule
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (Earlier) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (3.5 EVD or Greater) - Replace