Alternator - Remove and Install
- Disconnect the batteries.
Show/hide table
Illustration 1 g03120820 - Release tension on the belt tensioner and remove belt (1).
Show/hide table
Illustration 2 g03120976 - Disconnect harness assemblies from terminals (4).
- Remove bolts (2) and (5), then remove alternator (3).
Show/hide table
Illustration 3 g03121236 - Remove bolt (8) then remove tensioner (9).
- Remove four bolts (6) then remove alternator support (7).
- Install alternator (3) in the reverse order of removal.
- Tighten bolt (5) to a torque of
88 ± 7 N·m (65 ± 5 lb ft) .
- Tighten bolt (5) to a torque of
Caterpillar Information System:
C18 Marine Engines Crankshaft - Remove and Install
C18 Marine Engines Crankshaft Main Bearings - Remove and Install
C18 Marine Engines Connecting Rod Bearings - Remove and Install
C7.1 Industrial Engine Monitoring System - Engine Indicators and Aftertreatment Indicators
C18 Marine Engines Pistons and Connecting Rods - Remove and Install
C18 Marine Engines Piston Cooling Jets - Remove and Install
C18 Marine Engines Cylinder Liner - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
G3516C and G3516E Gas Engines Exhaust Temperature Sensor
3508B Industrial Engines Vibration Damper Guard
C18 Marine Engines Engine Oil Pan - Remove and Install
3500 Marine Engines Aftercooler
C18 Marine Engines Electric Starting Motor - Remove and Install
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117} Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
2012/05/28 A New Console Harness Assembly Is Available for Certain Excavators {1408}
G3500 Engines Accessory Drive (Lower Left Hand)
C1.5 and C2.2 Engines for Caterpillar Built Machines Clean Emissions Module
C18 Marine Engines Fuel Priming Pump - Remove and Install
C7.1 Industrial Engine Sensors and Electrical Components
C18 Marine Engines Fuel Filter Base - Remove and Install
C7.1-XQ200 Rental Generator Set Diesel Particulate Filter Regeneration
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (Earlier) - Replace
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace