Fuel Injection Lines
Show/hide table
Illustration 1 | g03047356 |
Right side view |
Show/hide table
Specification for 340-4176 Fuel Injection Lines Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 16     | 1D-4539 Bolt     | Torque to 25 ± 6 N·m (221 ± 53 lb in)     |
2     | 4     | 7N-6806 Rectangular Seal     | Before assembly, lubricate the bore lightly with the lubricant that is being sealed.     |
3     | 1     | 9N-4053 Spring     | Length under test force is 28.45 mm (1.120 inch).     |
Test force is 40.79 ± 2.05 N (9.17 ± 0.46 lb). |
|||
Free length after test is 57.15 mm (2.250 inch). |
Caterpillar Information System:
3516B Engine for the MT4400D Off-Highway Truck Flywheel Housing Cover
3516B Engine for the MT4400D Off-Highway Truck Engine Oil Filter
G3500 Generator Sets Fuel Filter Differential Pressure - Check
3512C and 3516C Marine Propulsion Engines Synchronization Problem
G3500 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Replace
3516B Engine for the MT4400D Off-Highway Truck Water Lines
3516B Engine for the MT4400D Off-Highway Truck Water Lines
G3500 Generator Sets Coolant Temperature Regulator - Replace
G3516C and G3516E Gas Engines Water Lines
C7.1 Industrial Engine Plate Locations and Film Locations
G3500 Generator Sets Coolant Sample (Level 2) - Obtain
C7.1 Industrial Engine Plate Locations and Film Locations - Aftertreatment System
2012/05/23 New Cylinder Head Gasket on Certain 3044C and C3.4 Engines {1100, 1100, 7555}
320E and 323E Excavators Engine and Machine Warm-Up
G3500 Engines Product Lifting
C18 Marine Engines Engine Oil Pump - Remove and Install
C7.1-XQ200 Rental Generator Set Belts - Inspect/Adjust/Replace
C18 Marine Engines Engine Support (Front) - Remove and Install
3512C and 3516C Marine Engines Electronic Control Module (ECM)
C18 Marine Engines Flywheel - Remove and Install
C18 Marine Engines Crankshaft Rear Seal - Remove and Install
C18 Marine Engines Flywheel Housing - Remove and Install
C18 Marine Engines Vibration Damper and Pulley - Remove and Install
C18 Marine Engines Crankshaft Front Seal - Remove and Install