2012/07/31 Caterpillar


New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NOx Feedback {1901, 1920}

Usage:

G3516 WPT
Engine:
G3516 (S/N: WPT1-UP; WPW1-UP)
Engine News SEBD9796, 27 July 2012, "New Software Is Used for Certain G3500 Engines". This article has been revised to change the title and to state that the software is only adaptable to the above G3516 Engines with the ADEM 3 ECM and NOx feedback.

Description of Change:

The new software enhances startability and improves low load acceptance.

Adaptable To:

The new 398-0151 Software Group replaces the former 317-5317 Software Group, which is canceled.

The new software is only adaptable to the above G3516 Engines with the ADEM 3 ECM and a NOx sensor.

The new software is effective with the following serial numbers:

  • WPT01560

  • WPW02910

Caterpillar Information System:

C9.3 Tier 4 Final Engines Fuel Rail Pressure Leakage Is High
C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low While Cranking
C9.3 Tier 4 Final Engines Fuel Rail Pressure Is Low
C9.3 Tier 4 Final Engines Fuel Injection Pump - Test
Failure of Speed/Timing Sensors on C175-16 Generator Set Engines{1907, 1907} Failure of Speed/Timing Sensors on C175-16 Generator Set Engines{1907, 1907}
C18 Marine Engines Fuel Transfer Pump - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Is Restricted
325 VM and VH Variable Gauge Undercarriage Final Drive - Assemble
C9.3 Tier 4 Final Engines Injector Solenoid - Test
C32 Marine Engines Electric Starting Motor - Remove and Install
C32 Marine Engines Alternator - Remove and Install
C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install
3512C and 3516C Marine Engines Turbocharger
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
C7.1 Industrial Engine Cooling System
3512C and 3516C Marine Engines Fumes Disposal System
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
G3500B Engines Crankshaft
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.