Turbocharger
Show/hide table
 | |
| Illustration 1 | g03384805 |
Front view of engine | |
Show/hide table
| Specification for 389-7912 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 16 | 2N-2766 Locknut | Torque to 55 ± 5 N·m (41 ± 4 lb ft). |
| 2 | 16 | 5P-7128 High Temperature Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads. |
Show/hide table
 | |
| Illustration 2 | g03384806 |
Show/hide table
| Specification for 389-7912 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 3 | 1 | 268-2960 Clamp As | Use the following procedure in order to tighten the clamp assembly: |
| 1. Before assembly, apply Loctite C5A copper anti-seize to the threads. | |||
| 2. Tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
| 3. Gently tap around the clamp assembly. | |||
| 4. Again, tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
| 4 | 1 | 9N-2038 Turbine Clamp As | Use the following procedure in order to tighten the turbine clamp assembly: |
| 1. Before assembly, apply Loctite C5A copper anti-seize to the threads. | |||
| 2. Tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
| 3. Gently tap around the turbine clamp assembly. | |||
| 4. Again, tighten to 13.2 ± 1.5 N·m (116.8 ± 13.3 lb in). |
|||
Caterpillar Information System:
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
3512C and 3516C Marine Engines Fumes Disposal System
C7.1 Industrial Engine Cooling System
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
3512C and 3516C Marine Engines Turbocharger
2012/07/31 New Software Is Used for Certain G3516 Engines with the ADEM 3 Electronic Control Module (ECM) and NO<SUB>x</SUB> Feedback {1901, 1920}
C9.3 Tier 4 Final Engines Fuel Rail Pressure Leakage Is High
G3500B Engines Crankshaft
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
C18 Marine Engines Electronic Unit Injector - Remove and Install
3516B Engine for the MT4400D Off-Highway Truck Fuel Injector
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Marine Engines Turbocharger - Remove and Install
G3516C and G3516E Gas Engines Camshaft Bearing Position
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install