Fuel Injector
Show/hide table
Illustration 1 | g03045460 |
Show/hide table
Specification for 346-4716 Fuel Injection Pump Gp     | |||
Item     | Qty     | Part     | Specification Description     |
-     | -     | -     | Before assembly, lubricate the bore for the fuel injection pump with 1P-0808 Multipurpose Grease.     |
1     | 1     | 7F-8698 Bolt     | Torque to 65 ± 7 N·m (48 ± 5 lb ft).     |
B     | -     | -     | Timing dimension is 64.34 ± 0.20 mm (2.533 ± 0.008 inch).     |
Caterpillar Information System:
C18 Marine Engines Electronic Unit Injector - Remove and Install
G3516C and G3516E Gas Engines Cylinder Block
G3516C and G3516E Gas Engines Cylinder Block
G3500B Engines Crankshaft
3516B Engine for the MT4400D Off-Highway Truck Turbocharger
2013/08/21 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500, G3500, 3600, G3600, and C280 Engines {1317}
2012/09/27 A New High-Temperature Tee Hose Is Available for Crankcase Breathers on 3500 Machine Engines {1317}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lubricant Viscosities
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Bearing (Earlier) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
3512C and 3516C Marine Engines Fumes Disposal System
C18 Marine Engines Electronic Unit Injector Sleeve - Remove and Install
C18 Marine Engines Turbocharger - Remove and Install
G3516C and G3516E Gas Engines Camshaft Bearing Position
C18 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
C18 Marine Engines Inlet and Exhaust Valves - Remove and Install
2012/05/21 Viewing the Electronic Thermostat Position via ET on C175 Engines {135V, 7610}
C18 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install
C18 Marine Engines Inlet and Exhaust Valve Seat Inserts - Remove and Install
2012/05/21 New Clamping for the Jacket Water Bypass Tube on Certain 3500 Engines {1380, 7553}
3512C and 3516C Marine Propulsion Engines Speed Control - Test
G3500 Generator Sets Fluid Recommendations
2012/05/23 Activation Password Is Now Required For Touchscreens Of Uninterruptible Power Supplies {7451}