3500C Marine Engines Caterpillar


Stub Shaft (Front)

Usage:

3512C 2A2


Illustration 1g03020240


Illustration 2g06262747
Tightening Sequence

Table 1
Item  Qty  Part  Specification Description 
12  5N-2317 Bolt  Torque to 1150 ± 60 N·m (848 ± 44 lb ft) in numerical sequence as shown in Illustration 2. 

Caterpillar Information System:

3512B and 3512C Petroleum Generator Set Engines Exhaust Fitting
3512C and 3516C Marine Engines Exhaust Manifold
3512C and 3516C Marine Engines Fuel Injector
G3500 Engines Gear Group (Rear)
3512C and 3516C Marine Engines Exhaust Manifold
3512C and 3516C Marine Engines Engine Trunnion
3512C and 3516C Marine Engines Exhaust Bypass Valve
3512C and 3516C Marine Engines Exhaust Bypass Valve
C7.1 Industrial Engine Safety Messages
3512C and 3516C Marine Engines Exhaust Manifold
3512C and 3516C Marine Engines Exhaust Manifold
3500B and 3500C Marine Engines Connecting Rod
3500C Marine Engines Stub Shaft (Front)
CX48-P2300 Petroleum Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Remove and Install
3512C and 3516C Marine Engines Exhaust Manifold
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System System Schematic
Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F} Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F}
2012/08/28 A New Power Distribution Box and Disconnect Switch Is Used on C175-16 Generator Set Engines {1417, 1420, 4461}
C175-16 Locomotive Engines Safety Messages
C175-16 Engine Emergency Stopping
C175-16 Engine Fuel Tank Water and Sediment - Drain
C175-16 Engine Aftercooler Core - Inspect/Clean
2012/05/02 New Transmission Software is Available for Certain CX31 Transmissions and Certain CT660 On-Highway Trucks {7620}
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348} WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.