Exhaust Manifold
Show/hide table
Illustration 1 | g03019938 |
Show/hide table
Specifications for 378-8888 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 364-5416 Bellows As | Ensure that the bellows are installed for proper flow direction as indicated on the bellows by arrow. |
2 | 4 | 363-2057 Band Clamp | Use the following procedure to tighten the band clamps:
1. Tighten the band clamps to 2. Gently tap around the band clamps with a soft hammer. 3. Again, tighten the band clamps to |
3 | 4 | 9L-2295 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
4 | 4 | 241-2634 Clamp As | Before assembly, lubricate the threads, the bearing surfaces, and the inside diameter of clamp assemblies with Loctite C5A Copper Anti-Seize. |
Use the following procedure to tighten the clamp assemblies:
1. Tighten the clamp assemblies to 2. Gently tap around the clamp assemblies with a soft hammer. 3. Again, tighten the clamp assemblies to |
|||
5 | 8 | 9L-7373 High Temperature Bolt | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
1. Tighten the bolts to 2. Again, tighten the bolts to |
Caterpillar Information System:
3512C and 3516C Marine Engines Engine Trunnion
3512C and 3516C Marine Engines Exhaust Bypass Valve
3512C and 3516C Marine Engines Exhaust Bypass Valve
C7.1 Industrial Engine Safety Messages
3512C and 3516C Marine Engines Exhaust Manifold
3512C and 3516C Marine Engines Exhaust Manifold
3500B and 3500C Marine Engines Connecting Rod
3500C Marine Engines Exhaust Bypass Valve
3500C Marine Engines Gear Group (Rear)
C3.4B Engines for Caterpillar Built Machines Support and Mounting (CEM) - Remove and Install - Option 3
3500C Marine Engines Gear Group (Rear)
3512C and 3516C Marine Engines Exhaust Manifold
G3500 Engines Gear Group (Rear)
3512C and 3516C Marine Engines Fuel Injector
3512C and 3516C Marine Engines Exhaust Manifold
3512B and 3512C Petroleum Generator Set Engines Exhaust Fitting
3500C Marine Engines Stub Shaft (Front)
3500C Marine Engines Stub Shaft (Front)
CX48-P2300 Petroleum Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Remove and Install
3512C and 3516C Marine Engines Exhaust Manifold
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System System Schematic
Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F} Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F}
2012/08/28 A New Power Distribution Box and Disconnect Switch Is Used on C175-16 Generator Set Engines {1417, 1420, 4461}
C175-16 Locomotive Engines Safety Messages