3512C and 3516C Marine Engines Caterpillar

Exhaust Bypass Valve

Usage:

3516C HZS

Show/hide table




Illustration 1	g03019778
Top front view

Show/hide table

Table 1
Specification for 387-5464 Exhaust Bypass
Item	Qty	Part	Specification Description
1	4	5M-1719 Taperlock Stud	Torque to 35 ± 5 N·m (26 ± 4 lb ft).
2	4	168-7800 Locknut	Before assembly, clean the stud, the locknut, and the locknut/base assembly interface area. Use the following procedure to tighten the locknut: 1. Tighten the two diagonal locknuts to 25 ± 6 N·m (221 ± 53 lb in). 2. Tighten the remaining locknuts to 25 ± 6 N·m (221 ± 53 lb in). 3. Retighten all the four locknuts to 1E2079A.

Show/hide table




Illustration 2	g03019779

Show/hide table

Table 2
Item	Qty	Part	Specification Description
3	1	7S-7816 Locknut	Torque to 12.5 ± 1.0 N·m (110.6 ± 8.9 lb in).
4	1	7E-4677 Spring	Free length is 115.3 mm (4.54 inch).
5	1	7E-4676 Spring	Free length is 115.3 mm (4.54 inch).
6	1	1B-2578 Nut	Torque to 14 ± 3 N·m (124 ± 27 lb in).
7	5	7C-9721 Screw	Torque to 6.5 ± 1.0 N·m (57.5 ± 8.9 lb in).
8	1	320-8921 Setscrew	Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize.

Caterpillar Information System:

3512C and 3516C Marine Engines Exhaust Bypass Valve

C7.1 Industrial Engine Safety Messages

3512C and 3516C Marine Engines Exhaust Manifold

3512C and 3516C Marine Engines Exhaust Manifold

3500B and 3500C Marine Engines Connecting Rod

3500C Marine Engines Exhaust Bypass Valve

3500C Marine Engines Gear Group (Rear)

C3.4B Engines for Caterpillar Built Machines Support and Mounting (CEM) - Remove and Install - Option 3

3500C Marine Engines Gear Group (Rear)

3512C and 3516C Marine Engines Exhaust Manifold

3500C Marine Engines Camshaft

3512C and 3516C Marine Engines Exhaust Manifold

3512C and 3516C Marine Engines Engine Trunnion

3512C and 3516C Marine Engines Exhaust Manifold

G3500 Engines Gear Group (Rear)

3512C and 3516C Marine Engines Fuel Injector

3512C and 3516C Marine Engines Exhaust Manifold

3512B and 3512C Petroleum Generator Set Engines Exhaust Fitting

3500C Marine Engines Stub Shaft (Front)

3500C Marine Engines Stub Shaft (Front)

CX48-P2300 Petroleum Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Remove and Install

3512C and 3516C Marine Engines Exhaust Manifold

CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System System Schematic

Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F} Procedure for Checking Ash Build-Up Within the Diesel Particulate Filter (DPF) {108F}