Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
- Engine:
- 3176B (S/N: 9WK1-UP)
- Marine Engine:
- 3176C (S/N: 6BW1-UP)
- C-12 (S/N: K1M1-UP)
- C12 (S/N: NFL1-UP)
- C-12 (S/N: K1M1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
On certain Marine Engines, the 8S-5383 Block in the alternator mounting group can be installed backwards. This improper installation causes the block to foul on the alternator or bend the tie rod, also causing a low torque condition.
Solution
Refer to the Illustrations below for examples of correct and incorrect installation of the 8S-5383 Block .
Show/hide table
Illustration 1 | g02943016 |
Incorrect installation |
Show/hide table
Illustration 2 | g02943057 |
Correct installation |
Caterpillar Information System:
2012/03/21 New Engine Software Is Now Available for Certain C32 Generator Sets {1920}
Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067} Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067}
2012/05/04 New Software Is Available for Certain C18 Industrial Engines {1901, 1920}
3500E Marine Engines Coolant Temperature Regulator - Replace
C175-16 Marine Propulsion Engines Engine Misfires, Runs Rough or Is Unstable
C175-16 Locomotive Engine Aftercooler Coolant Temperature Is High
C175-16 Marine Propulsion Engines Exhaust Temperature Is Low
C175-16 Marine Propulsion Engines Engine Harness
2012/09/13 New Basic Engine Components Are Used in C175-16 Engines {1156, 1202, 1205, 1218}
TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil Sample - Obtain
C175-16 Locomotive Engine Engine Has Mechanical Noise (Knock)
C175-16 Locomotive Engine Fuel Temperature Is High
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555} Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
SPF343 and SPF343C Trailer Mounted Pumpers Refill Capacities
C175-16 Marine Propulsion Engines Stub Shaft (Front)
C175-16 Marine Propulsion Engines Air Inlet Elbow
C175-16 Marine Propulsion Engines Air Lines
C175-16 Locomotive Engine Aftercooler
C175-16 Marine Propulsion Engines Cover Group (Front Housing)
C175-16 Marine Propulsion Engines Flywheel Housing Cover
C175-16 Marine Propulsion Engines Fuel Injection Lines
C175-16 Marine Propulsion Engines Coolant Level Sensor
C175-16 Marine Propulsion Engines Water Lines
2012/04/24 Improved Coolant Filler Neck Is Used on Certain C32 Marine Engines {1379}