C175-16 Marine Propulsion Engines Caterpillar


Engine Harness

Usage:

C175-16 M6A


Illustration 1g02937164

Table 1
Specification for 307-8718 Engine Harness As 
Item  Qty  Part  Specification Description 
Apply blue Loctite 242 to all threaded PMA surfaces. 
Tighten all plastic M12 nuts to 1.0 ± 0.5 N·m (8.9 ± 4.4 lb in)
Tighten all plastic M16 nuts to 3.0 ± 0.5 N·m (26.6 ± 4.4 3lb in)
Tighten all plastic M40 nuts to 15 ± 1 N·m (133 ± 9 lb in)

Caterpillar Information System:

2012/09/13 New Basic Engine Components Are Used in C175-16 Engines {1156, 1202, 1205, 1218}
TH48-E80 Petroleum Transmission Torque Converter and Transmission Oil Sample - Obtain
C175-16 Locomotive Engine Engine Has Mechanical Noise (Knock)
C175-16 Locomotive Engine Fuel Temperature Is High
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Speed Control
C280 Marine, Marine Auxiliary, and Petroleum Engines Metal Particle Detector - Inspect/Clean
C280 Marine, Marine Auxiliary, and Petroleum Engines Exhaust Piping - Check
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Valve Lash and Bridge - Check
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Air Precleaner - Check/Clean
C280 Marine, Marine Auxiliary, and Petroleum Engines Engine Air Cleaner Element (Single Element) - Inspect/Replace
C15 Petroleum Generator Set Engines Engine Valve Lash - Inspect/Adjust
C280 Marine, Marine Auxiliary, and Petroleum Engines Coolant Sample (Level 1) - Obtain
C175-16 Marine Propulsion Engines Exhaust Temperature Is Low
C175-16 Locomotive Engine Aftercooler Coolant Temperature Is High
C175-16 Marine Propulsion Engines Engine Misfires, Runs Rough or Is Unstable
3500E Marine Engines Coolant Temperature Regulator - Replace
2012/05/04 New Software Is Available for Certain C18 Industrial Engines {1901, 1920}
Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067} Repair of Exhaust Shields on Certain C13 and C15 Engines{1059, 1067}
2012/03/21 New Engine Software Is Now Available for Certain C32 Generator Sets {1920}
Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405} Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555} Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
SPF343 and SPF343C Trailer Mounted Pumpers Refill Capacities
C175-16 Marine Propulsion Engines Stub Shaft (Front)
C175-16 Marine Propulsion Engines Air Inlet Elbow
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.