Crankcase Breather - Remove - Unfiltered Breather
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 松开软管卡箍 (2)，然后从呼吸器 (1) 上拆下塑料管组件 (3)。
- 从夹子 (5) 上卸下塑料管组件 (3)。
- 从夹子 (5) 上卸下螺栓 (4)（未显示），然后拆下夹子。
Show/hide table
| |
| 图 1 | g02727965 |
Caterpillar Information System:
C7.1 (Mech) Industrial Engine Crankcase Breather - Install - Unfiltered Breather
C7.1 (Mech) Industrial Engine Crankcase Breather - Remove - Filtered Breather
C7.1 (Mech) Industrial Engine Crankcase Breather - Install - Filtered Breather
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Remove - Connecting Rods in Position
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Install - Connecting Rods in Position
C7.1 (Mech) Industrial Engine Camshaft Gear - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft Bearings - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft - Remove and Install
C7.1 (Mech) Industrial Engine Alternator - Remove
C7.1 (Mech) Industrial Engine Alternator - Install
C7.1 (Mech) Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C175-16 and C175-20 Generator Set Engines Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
C7.1 (Mech) Industrial Engine Crankshaft - Install
C7.1 (Mech) Industrial Engine Crankshaft - Remove
C7.1 (Mech) Industrial Engine Crankshaft Front Seal - Remove and Install
C7.1 (Mech) Industrial Engine Crankshaft Gear - Remove and Install
C7.1 (Mech) Industrial Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 (Mech) Industrial Engine Crankshaft Rear Seal - Install
C7.1 (Mech) Industrial Engine Crankshaft Rear Seal - Remove
C7.1 (Mech) Industrial Engine Cylinder Head - Install
C7.1 (Mech) Industrial Engine Cylinder Head - Remove
C7.1 (Mech) Industrial Engine Electric Starting Motor - Remove and Install
C7.1 (Mech) Industrial Engine Engine Oil Cooler - Install
C7.1 (Mech) Industrial Engine Engine Oil Cooler - Remove