New O-rings Are Now Used on Certain C27 / C32 Commercial Oil Pan Groups {1302}
- Generator Set:
- C32 GEN SET (S/N: SXC1-UP; JSJ1-UP)
- Industrial Engine:
- C27 INDUSTRIAL (S/N: TWM1-UP)
- Petroleum Engine:
- C32 PETROLEUM (S/N: B2C1-UP; SMP1-UP)
- Petroleum Power Train Package:
- C32 PET GENSET (S/N: PEF1-UP; PEK1-UP)
- C32 INDUSTRIAL (S/N: TLD1-UP)
Description of Change: A new O-ring is now used on the engines that are listed above. The new O-ring creates an improved seal between the oil pan and the cylinder block when compared to the present O-ring seal.
Adaptable To: The new 379-5053 O-Ring Seal is a direct replacement for the 6V-3830 O-Ring Seal. The new 379-5053 O-Ring Seal is adaptable back to the first production of the listed engines.
Groups included are: 269-6543 Oil Pan Cover, 269-6544 Oil Pan Cover, 265-5831 Oil Pan Cover, 188-4645 Oil Pan Cover, and 269-6429 Oil Pan Gp .
The change is effective at the factory with the engine serial numbers SXC05484-UP.
Caterpillar Information System:
320E and 323E Excavators Machine System Specifications Stick Lines
3516C Generator Sets Control Panel - Inspect/Test
307E2 Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
Initial Start-Up Procedure for CG137 and G3300B Engines {1000} Initial Start-Up Procedure for CG137 and G3300B Engines {1000}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
3516C Generator Set Engines Turbocharger Turbine Temperature Is High
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting Objects
R1600H Load Haul Dump Power Train Pressure Sensor (Transmission Oil)
3516C Generator Set Engines Oil Temperature Is High
3516C Generator Set Engines Oil Contains Fuel
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Emerging Symptom Information
793F and 797F Off-Highway Trucks Power Train Electronic Control System General Information
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
316E Excavator Machine System Specifications Window Wiper - Front, Upper
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}
2011/10/31 An Improved Inlet Manifold Pressure Sensor Is Used with Certain G3516C and G3520C Generator Set Engines {1408, 1439, 1917}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Connector Contact Description