Blade Lift Cylinder
Show/hide table
| |
| Illustration 1 | g02906477 |
Show/hide table
| Specification for 374-1857 Blade Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| - | - | - | All pin bores to be lubricated and free of paints. |
| 1 | 2 | Bushing | Bore after assembly is |
| 2 | 1 | 452-2753 Grease Fitting | Torque to |
| 3 | 1 | 392-4599 Head | Before assembly, lubricate the threads lightly with clean oil.
Tighten the head to |
| B | 1 | 392-4560 Tube Kit | Bore is |
| C | 1 | 392-4598 Rod As | Diameter is |
| 4 | 1 | 418-5329 Piston | Tighten to |
| 5 | 1 | 096-3216 Socket Setscrew | Tighten the socket setscrew to |
| 6 | - | - | Before assembly, apply green Loctite 648 to the wiper seal groove. |
| 7 | - | - | Lubricate sealing lip lightly with the lubricant that is being sealed. |
Caterpillar Information System:
Initial Start-Up Procedure for CG137 and G3300B Engines {1000} Initial Start-Up Procedure for CG137 and G3300B Engines {1000}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
3516C Generator Set Engines Turbocharger Turbine Temperature Is High
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting Objects
R1600H Load Haul Dump Power Train Pressure Sensor (Transmission Oil)
3516C Generator Set Engines Oil Temperature Is High
3516C Generator Set Engines Oil Contains Fuel
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Emerging Symptom Information
793F and 797F Off-Highway Trucks Power Train Electronic Control System General Information
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679} Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
3516C Generator Sets Control Panel - Inspect/Test
320E and 323E Excavators Machine System Specifications Stick Lines
2012/02/07 New O-rings Are Now Used on Certain C27 / C32 Commercial Oil Pan Groups {1302}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
316E Excavator Machine System Specifications Window Wiper - Front, Upper
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves