Control Panel - Inspect/Test
Inspect the condition of the panel. If a component is damaged, ensure that the component is repaired or that the component is replaced. If equipped, ensure that the electronic displays are operating properly. Inspect the wiring for good condition. Ensure that the wiring connections are secure.
Electronic Modular Control Panel 4.2 (EMCP 4.2)
For detailed information on this electronic control panel, see Systems Operation, Troubleshooting, Testing and Adjusting, UENR1209, "EMCP4.1/4.2".
The Panel Lights switch should turn on the panel lights. Toggle the switch in order to ensure that the panel lights are working.
Test the LED indicators and the horn when the data link is connected and when the data link is not connected. The Lamp Test button is located near the top of the annunciator panel. Test both the horn and the indicators by pressing and holding the Lamp Test button. Replace any faulty components before starting the engine.
Caterpillar Information System:
307E2 Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
Initial Start-Up Procedure for CG137 and G3300B Engines {1000} Initial Start-Up Procedure for CG137 and G3300B Engines {1000}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
3516C Generator Set Engines Turbocharger Turbine Temperature Is High
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting Objects
R1600H Load Haul Dump Power Train Pressure Sensor (Transmission Oil)
3516C Generator Set Engines Oil Temperature Is High
3516C Generator Set Engines Oil Contains Fuel
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Emerging Symptom Information
793F and 797F Off-Highway Trucks Power Train Electronic Control System General Information
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679} Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
320E and 323E Excavators Machine System Specifications Stick Lines
2012/02/07 New O-rings Are Now Used on Certain C27 / C32 Commercial Oil Pan Groups {1302}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
316E Excavator Machine System Specifications Window Wiper - Front, Upper
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
G3500 Engines Actuator Linkage - Air/Fuel Ratio Control
C13 Engine for Combat and Tactical Vehicles Fuel Transfer Pump
2011/10/31 A New Hose Assembly Is Used for the Duplex Fuel Filters on Certain 3516B Engines {1261}
Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218} Using the Inspection Head (ISH) Ultrasonic Reader for G3600, 3600, and C280 Connecting Rod Bolts{0769, 1218}
C13 Engine for Combat and Tactical Vehicles Cylinder Head Valves
2011/10/31 Improved Bolts Are Used for the High-Pressure Fuel Pump Relief Valve on C175-16 Engines {1251, 7553}