R1600H Load Haul Dump Power Train Caterpillar


Pressure Sensor (Transmission Oil)

Usage:

R1600H 9SD



图 1g02733673

表 1
344-7389 压力传感器总成 的技术规格    
项目     数量     零件     技术规格说明    
1     1     344-7389 压力传感器总成     拧紧至扭矩为
62 ± 6 N·m (45.7 ± 4.4 lb ft)。    
工作电压为 +7 VDC 至 +14 VDC。
输出:PWM。
输出频率为 500 ± 100 Hz。
工作负载循环应在 5% 到 95%。

Caterpillar Information System:

3516C Generator Set Engines Oil Temperature Is High
3516C Generator Set Engines Oil Contains Fuel
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Emerging Symptom Information
793F and 797F Off-Highway Trucks Power Train Electronic Control System General Information
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679} Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
C13 Engine for Combat and Tactical Vehicles Electronic Unit Injector Wiring
3516C Generator Set Engines Engine Top Speed Is Not Obtained
3516C Generator Set Engines Engine Stalls at Low RPM
3516C Generator Set Engines Engine Shutdown Occurs Intermittently
3516C Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
3516C Generator Set Engines Engine Has Mechanical Noise (Knock)
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Lifting Objects
3516C Generator Set Engines Turbocharger Turbine Temperature Is High
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122} 362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
Initial Start-Up Procedure for CG137 and G3300B Engines {1000} Initial Start-Up Procedure for CG137 and G3300B Engines {1000}
307E2 Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
3516C Generator Sets Control Panel - Inspect/Test
320E and 323E Excavators Machine System Specifications Stick Lines
2012/02/07 New O-rings Are Now Used on Certain C27 / C32 Commercial Oil Pan Groups {1302}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551} 149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
316E Excavator Machine System Specifications Window Wiper - Front, Upper
316E Excavator Machine System Specifications Window Wiper and Washer - Lower
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.