Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555} Caterpillar

Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}

Usage:

793B 1HL

Caterpillar Products:Machine Engines All 3500 Series
Caterpillar Products: 3500 Family Generator Sets and Power Modules 3500 Family Pumpers 3500C Engines
Engine:Commercial 3500 and 3500B G3500 Family

Introduction

Before you perform any procedure with the topics of this Special Instruction, make sure that the information has been read and understood.

This Special Instruction describes where to use the 352-6061 Liner Seal and the 8N-4707 Filler Band .

352-6061 Liner Seal

Show/hide table




Illustration 1	g02660182
352-6061 Liner Seal

The 352-6061 Liner Seal is for use with engine blocks that have a chamfer at the outer diameter of the cylinder liner bore. The chamfer was effective on production cylinder blocks beginning 1December 2009.

The 352-6061 Liner Seal has a rounded shape on the outside diameter with color coding on the rounded surface.

The 352-6061 Liner Seal can be used with the cylinder liner 353-5617 Insert and with the cylinder liner 353-5618 Insert

8N-4707 Filler Band

Show/hide table




Illustration 2	g02660176
8N-4707 Filler Band

The 8N-4707 Filler Band is for use with engine blocks that do not have a chamfer at the outer diameter of the cylinder liner bore.

The 8N-4707 Filler Band is black with a rectangular cross-section.

Caterpillar Information System:

C3.4B Engines For Caterpillar Built Machines Gear Group (Front)

3516C Generator Sets Product Storage

C3.4B Engines For Caterpillar Built Machines Connecting Rod

C3.4B Engines For Caterpillar Built Machines Engine Oil Filter Base

C3.4B Industrial Engine Engine Starting

120 Motor Graders Bypass Switch (Power Train Oil Filter)

3500B and 3500C Marine Engines Cylinder Block

TA19 M4WD Agricultural Transmission Pump Drive

TA19 M4WD Agricultural Transmission Transmission Hydraulic Control

C27 Generator Set Parallel Operation

2011/07/28 New Fuel Pressure Regulators Are Now Used on 3126 and C7 On-Highway Engines {1715}

C27 Generator Set Before Starting Engine

2011/07/29 An Improved Procedure Is Now Used to Determine the Reason for a Reoccurring Engine Timing Offset Code on Certain C27 and C32 Engines {1000}

370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}

3516C Generator Set Engines Electrical Power Supply - Test

320E and 323E Excavators Quick Coupler Operation - Circuit for Universal Coupler (If Equipped)

2011/08/04 New Valve Train Components for C175 Generator Set Engines {1102, 1121, 1123, 1209}

C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base

C175-16 Locomotive Engine Turbocharger Inlet Pressure Sensor

TA19 M4WD Agricultural Transmission Transmission

3516C Generator Sets General Hazard Information

3516C Generator Sets Burn Prevention

C9.3 Tier 4 Final Engines Fuel Injector

C3.4B Engines for Caterpillar Built Machines Valve Guide - Inspect