Transmission Hydraulic Control
Show/hide table
 | |
| Illustration 1 | g02659196 |
Rear view of transmission | |
Show/hide table
 | |
| Illustration 2 | g02659197 |
Front view of transmission | |
Show/hide table
| Specification for 317-5330 Transmission Hydraulic Control Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 6V-9028 O-Ring Seal | Lubricate the O-ring lightly with the lubricant being sealed. |
| 2 | 1 | 238-0112 Temperature Sensor Gp | Torque to 20 ± 3 N·m (177 ± 27 lb in). Type is passive. |
| 3 | 22 | 8T-6869 Bolt | Torque to 30 ± 4 N·m (266 ± 35 lb in). |
Show/hide table
 | |
| Illustration 3 | g02659198 |
Left view of transmission | |
Show/hide table
 | |
| Illustration 4 | g02659199 |
Top view of transmission | |
Show/hide table
| Specification for 317-5330 Transmission Hydraulic Control Gp | |||
| Item | Qty | Part | Specification Description |
| 4 | 1 | 191-8305 Speed Sensor Gp | Torque to 28 ± 7 N·m (248 ± 62 lb in). |
| 5 | 2 | 9X-4609 O-Ring Seal | Lubricate the bore lightly with lubricant being sealed. |
| 6 | 2 | 117-1385 O-Ring Seal | Lubricate lightly with the lubricant being sealed. |
| 7 | 2 | 191-8304 Speed Sensor Gp | Torque to 28 ± 7 N·m (248 ± 62 lb in). |
| 8 | 1 | 2P-1692 O-Ring Seal | Lubricate lightly with the lubricant being sealed. |
| 9 | 5 | 8S-0768 O-Ring Seal | Lubricate lightly with the lubricant being sealed. |
| 10 | 1 | 161-9932 Pressure Sensor Gp | Torque to 10 ± 2 N·m (89 ± 18 lb in). Operating voltage is 5.00 ± 0.25 VDC. |
Caterpillar Information System:
C27 Generator Set Parallel Operation
2011/07/28 New Fuel Pressure Regulators Are Now Used on 3126 and C7 On-Highway Engines {1715}
C27 Generator Set Before Starting Engine
3516C Generator Set Engines Injector Solenoid - Test
992K Wheel Loader Hoses and Clamps - Inspect/Replace
3516C Generator Set Engines Speed/Timing - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines General Information
C3.4B Industrial Engine Cold Weather Operation
C27 Generator Set Starting the Engine
C7.1 (Mech) Industrial Engine Cleanliness of Fuel System Components
2011/07/28 New Water Pump Groups Are Used on Certain Commercial Engines {1361}
2011/07/28 New Water Pump Groups Are Used on Certain Truck Engines {1361}
TA19 M4WD Agricultural Transmission Pump Drive
3500B and 3500C Marine Engines Cylinder Block
120 Motor Graders Bypass Switch (Power Train Oil Filter)
C3.4B Industrial Engine Engine Starting
C3.4B Engines For Caterpillar Built Machines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Connecting Rod
3516C Generator Sets Product Storage
C3.4B Engines For Caterpillar Built Machines Gear Group (Front)
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555} Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
2011/07/29 An Improved Procedure Is Now Used to Determine the Reason for a Reoccurring Engine Timing Offset Code on Certain C27 and C32 Engines {1000}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
3516C Generator Set Engines Electrical Power Supply - Test