TA19 M4WD Agricultural Transmission Caterpillar


Pump Drive

Usage:

TA19-M4WD XAE



Illustration 1g02659259

Table 1
Specification for 317-5329 Pump Drive Gp    
Item     Qty     Part     Specification Description    
1     2     6Y-1223 Thrust Disc     Thickness is
1.91 ± 0.10 mm (0.075 ± 0.004 inch).    
2     1     265-5732 Idler Shaft     Diameter is
42.395 ± 0.008 mm (1.6691 ± 0.0003 inch).    
3     1     258-8738 O-Ring Seal     Lubricate the bore of the seal lightly with lubricant being sealed.    

Caterpillar Information System:

TA19 M4WD Agricultural Transmission Transmission Hydraulic Control
C27 Generator Set Parallel Operation
2011/07/28 New Fuel Pressure Regulators Are Now Used on 3126 and C7 On-Highway Engines {1715}
C27 Generator Set Before Starting Engine
3516C Generator Set Engines Injector Solenoid - Test
992K Wheel Loader Hoses and Clamps - Inspect/Replace
3516C Generator Set Engines Speed/Timing - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines General Information
C3.4B Industrial Engine Cold Weather Operation
C27 Generator Set Starting the Engine
C7.1 (Mech) Industrial Engine Cleanliness of Fuel System Components
2011/07/28 New Water Pump Groups Are Used on Certain Commercial Engines {1361}
3500B and 3500C Marine Engines Cylinder Block
120 Motor Graders Bypass Switch (Power Train Oil Filter)
C3.4B Industrial Engine Engine Starting
C3.4B Engines For Caterpillar Built Machines Engine Oil Filter Base
C3.4B Engines For Caterpillar Built Machines Connecting Rod
3516C Generator Sets Product Storage
C3.4B Engines For Caterpillar Built Machines Gear Group (Front)
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555} Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
2011/07/29 An Improved Procedure Is Now Used to Determine the Reason for a Reoccurring Engine Timing Offset Code on Certain C27 and C32 Engines {1000}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
3516C Generator Set Engines Electrical Power Supply - Test
320E and 323E Excavators Quick Coupler Operation - Circuit for Universal Coupler (If Equipped)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.