Ignition System Timing - Check/Adjust
如果更换了 ECM 且没有使用复制配置功能,则必须进行发动机正时标定。 另外,如果未在发动机的前齿轮系上进行该工作,则必须标定正时。
通过 Cat 电子技师(ET)将偏置值编程到 ECM 中。
使用发动机转速 / 正时传感器来检测凸轮轴的上止点。 提供该信号给 ECM。
执行测试和调整, KENR6870, "正时 - 标定"中描述的步骤。
Caterpillar Information System:
UPSB130 Uninterruptible Power Supply UPS Battery - 60Hz IGBT - Test
G3304B and G3306B Engines Overhaul (Top End)
G3304B and G3306B Engines Plate Locations and Film Locations
C13, C15, and C18 Tier 4 Interim Engines Shutdown - Test
C18 Generator Set Engine Speed/Timing Sensor - Clean/Inspect
323-1146 C-175 Engine Lifting Bracket{0599, 0629, 0701, 1000, 1122} 323-1146 C-175 Engine Lifting Bracket{0599, 0629, 0701, 1000, 1122}
2011/03/21 Power to the Fuel Control Module Is Now Supplied by the Engine Electronic Control Module (ECM) on C175-16 Generator Sets {1000, 1900}
G3304B and G3306B Engines Safety Messages
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706} 9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
C15 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C15 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C15 Petroleum Engines Fuel Temperature Sensor - Remove and Install
C27 and C32 Industrial Engines Product Description
C32 Petroleum Engines Refill Capacities
C32 Petroleum Engines Fluid Recommendations
C27 and C32 Industrial Engines Coolant (DEAC) - Change
C27 and C32 Industrial Engines Coolant (ELC) - Change
C32 Petroleum Engines Coolant Extender (ELC) - Add
C27 and C32 Industrial Engines Coolant Level - Check
C32 Petroleum Engines Coolant Sample (Level 1) - Obtain
3500 Generator Sets Coolant Sample (Level 2) - Obtain
UPSB505 Uninterruptible Power Supply External Battery Cabinet Connection
G3304B and G3306B Engines Refill Capacities
G3406 Engine Fluid Recommendations