A New Heat Shield Group Is Used on Certain C27 and C32 Generator Sets {1067}
- Generator Set:
- C27 (S/N: DWB1-UP)
- C32 (S/N: SXC1-UP; JSJ1-UP; SYC1-UP)
Description of Change: The new heat shield group provides the valve covers with improved protection from the heat produced by the turbochargers.
Adaptable To: The new 362-3104 Heat Shield Gp is adaptable back to first production on the serial numbers listed above. Refer to Table 1 for a list of the parts included in the 362-3104 Heat Shield Gp.
Show/hide table
 | |
| Illustration 1 | g02479618 |
Left side view of the 362-3104 Heat Shield Gp (1) 237-9382 Heat Shield As installed near left side turbocharger | |
Show/hide table
| 362-3104 Heat Shield Gp | ||
| New Part Number | Description | Quantity |
| 237-9382 | Heat Shield As | 1 |
| 254-8208 | Heat Shield As | 1 |
| 8C-6876 | Bolts | 5 |
| 8T-4224 | Hard Washers | 5 |
Show/hide table
| Effective Serial Numbers |
| S/N:DWB2451-UP |
| S/N:JSJ1208-UP |
| S/N:SXC5475-UP |
Caterpillar Information System:
2011/03/11 Lubrication of the Fuel Injection Pump on 3011C, 3013C, 3024C, C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Engines {1251, 1290}
UPSB505 Uninterruptible Power Supply Auxiliary Connection
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System E-Ceiling and Cab Avoidance - Troubleshoot
C15 Petroleum Engines Engine Oil Pan - Remove and Install
Procedure for Fabricating New Clean Gas Induction (CGI) Lines on Certain C15 Truck Engines{1071} Procedure for Fabricating New Clean Gas Induction (CGI) Lines on Certain C15 Truck Engines{1071}
UPSB505 Uninterruptible Power Supply Static Switch Maintenance Connection
2011/04/08 A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Machine Engines {1302, 7555}
2011/04/08 A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Engines {1302, 7555}
C15 Petroleum Engines Plate Locations and Film Locations
C175-16 Marine Engines Control Panel
C15 Petroleum Engines Turbocharger - Inspect
C15 Petroleum Engines Starting Motor - Inspect
C175 Generator Sets Fluid Recommendations
C175 Generator Sets Engine Oil Level - Check
C175-16 Locomotive Engine Fuel Rail Leakage - Check
C15 Petroleum Generator Set Product Description
3516C Generator Sets Diesel Exhaust Fluid Nozzle - Inspect/Clean
3516C Generator Sets Exhaust Inlet Nitrogen Oxide Sensor - Replace
3516C Generator Sets Exhaust Outlet Nitrogen Oxide Sensor - Replace
UPSB130 Uninterruptible Power Supply Fire Prevention and Explosion Prevention
UPSB505 Uninterruptible Power Supply Cable Routing
G3304B and G3306B Engines Product Description
C15 Petroleum Generator Set Refill Capacities
C15 Petroleum Generator Set Plate Locations and Film Locations