Combined Function - Electric Control: Default Value of Work Tool Parameters
Note: For this system, parameters that are not shown in the tables, do not affect operation of the work tool.
Note: The parameters in the "DARK GRAY" cells do not affect the operation of the work tool.
Table 1 shows a quick reference to the approved Caterpillar work tools that are used.
Table 2 shows parameters for "TOOL#1" through "TOOL#5".
Table 3 shows parameters for "TOOL#6" through "TOOL#10".
Note: All parameters are shown in metric units.
Show/hide table
Combined Function - Electric Control | ||||
Work Tool | Tool Name | Flow Control | Pump Control | TOOL#s |
Hammer | H160DS | One-Way | One Pump | #1 |
Hammer | H180DS | One-Way | Two Pumps | #2 |
Shear | MP30/S340B | Two-Way | Two Pumps | #3 |
Shear | S365B | Two-Way | Two Pumps | #4 |
Grapple | G330 | Two-Way | One Pump | #5 |
Bucket Thumb | THUMB L | Two-Way | Two Pumps | #6 |
Bucket Thumb | THUMB 1P | Two-Way | One Pump | #7 |
OTHER | 1P 1WAY | One-Way | One Pump | #8 |
OTHER | 1P 2WAY | Two-Way | One Pump | #9 |
OTHER | 2P 2WAY | Two-Way | Two Pumps | #10 |
Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the Tool Control System to find details of each of the parameters listed.
Show/hide table
Parameter Description | #1 | #2 | #3 | #4 | #5 |
General Parameters | |||||
Tool Program Tool Type | HAMMER | HAMMER | SHEAR | SHEAR | GRAPPLE |
Tool Program Name | H160DS | H180DS | MP30/S340B | S365B | G330 |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #2 | Combined Flow | Combined Flow | Combined Flow | Pump #2 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Enabled | Enabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | One-Way | One-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Show/hide table
Parameter Description | #6 | #7 | #8 | #9 | #10 |
General Parameters | |||||
Tool Program Tool Type | BUCKET THUMB | BUCKET THUMB | OTHER | OTHER | OTHER |
Tool Program Name | THUMB L | THUMB 1P | 1P 1WAY | 1P 2WAY | 2P 2WAY |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Combined Flow | Pump #2 | Pump #2 | Pump #2 | Combined Flow |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Enabled | Disabled | Disabled | Disabled | Enabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | Two-Way | Two-Way | One-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #3 Parameters | |||||
Tool Program Attachment Valve #3 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #3 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #3 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #3 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #3 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #3 | |
|
|
|
|
Tool Program Attachment Valve #3 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #3 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Caterpillar Information System:
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Medium Pressure Hydraulic System
C15 Industrial Engines Product Description
2014/12/12 Proper Installation of Connecting Rod Bearings for G3600, 3600, and C280 Engines {1225}
2011/02/17 Replacing the Lock Assembly on Certain Generator Sets {7274}
C4.4 Industrial Engine Radiator - Clean
3516C Locomotive Engines Engine Oil Pump - Assemble
3516C Locomotive Engines Engine Oil Pump - Disassemble
3516C Locomotive Engines Engine Oil Pump - Install
CG137-08 and CG137-12 Industrial Engines Engine Control Panel
C15 Industrial Engines Refill Capacities
CG137-08 and CG137-12 Industrial Engines CAN Data Link - Test
C4.4 Industrial Engine Burn Prevention
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control: Relief Valve (Line) - Test and Adjust
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Default Value of Work Tool Parameters
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control: Default Value of Work Tool Parameters
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control: Relief Valve (Line) - Test and Adjust
CG137-08 and CG137-12 Industrial Engines Engine Timing Does Not Match Programmed Timing
C18 Fire Pump Engine Refill Capacities
CG137-08 and CG137-12 Industrial Engines ECM - Replace
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905} 9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490} EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
G3304B and G3306B Engines Gas Pressure Regulator
C175-16 Marine Engines Electronic Control Module (ECM)
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950} Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}