Two-Way/One Pump - Electric Control: Default Value of Work Tool Parameters
Note: For this system, parameters that are not shown in the tables, do not affect operation of the work tool.
Note: The parameters in the "DARK GRAY" cells do not affect the operation of the work tool.
Table 1 shows a quick reference to the approved Caterpillar work tools that are used.
Table 2 shows parameters for "TOOL#1" through "TOOL#5".
Table 3 shows parameters for "TOOL#6" through "TOOL#10".
Note: All parameters are shown in metric units.
Show/hide table
Two-Way / One Pump - Electric Control | ||||
Work Tool | Tool Name | Flow Control | Pump Control | TOOL#s |
Other | - | Two-Way | One Pump | #1 - #10 |
Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the Tool Control System to find details of each of the parameters listed.
Show/hide table
Parameter Description | #1 | #2 | #3 | #4 | #5 |
General Parameters | |||||
Tool Program Tool Type | OTHER | OTHER | OTHER | OTHER | OTHER |
Tool Program Name | 0 | 0 | 0 | 0 | 0 |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #1 | Pump #1 | Pump #1 | Pump #1 | Pump #1 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Show/hide table
Parameter Description | #6 | #7 | #8 | #9 | #10 |
General Parameters | |||||
Tool Program Tool Type | OTHER | OTHER | OTHER | OTHER | OTHER |
Tool Program Name | 0 | 0 | 0 | 0 | 0 |
Tool Program Maximum Throttle Dial Position | 10 | 10 | 10 | 10 | 10 |
Tool Program Minimum Throttle Dial Position | 1 | 1 | 1 | 1 | 1 |
Economy Mode Enable Status | Enabled | Enabled | Enabled | Enabled | Enabled |
Tool Program Pump Flow Control Mode | Pump #1 | Pump #1 | Pump #1 | Pump #1 | Pump #1 |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Initial) | 0.0% | 0.0% | 0.0% | 0.0% | 0.0% |
Tool Program Medium Pressure Circuit Main Pump Power Reduction (Total) | 30.0% | 30.0% | 30.0% | 30.0% | 30.0% |
Tool Program Variable Relief Valve #1 Pressure | |
|
|
|
|
Tool Program Variable Relief Valve #2 Pressure | |
|
|
|
|
F2 Type Valve Maximum Flow Derate Pressure | |
|
|
|
|
F2 Type Valve Flow Derate Start Pressure | |
|
|
|
|
F2 Type Valve Flow Derate End Pressure | |
|
|
|
|
Enhanced Multiple Operation Attachment Valve Limit Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Single Pump Mode Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Single Pump Mode Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Boom Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Extend Pilot Pressure for Attachment Valve | |
|
|
|
|
Stick Operation Maximum Retract Pilot Pressure for Attachment Valve | |
|
|
|
|
Hammer Automatic Control Feature Enable Status | Disabled | Disabled | Disabled | Disabled | Disabled |
Hammer Automatic Control Feature Activation Pressure | |
|
|
|
|
Hammer Automatic Control Feature Deactivation Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #1 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Boom Cylinder Extend Pilot Pressure | |
|
|
|
|
Bypass Cutoff Valve #2 Activation Stick Cylinder Retract Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Boom Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Retract Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Start Pilot Pressure | |
|
|
|
|
Stick Cylinder Extend Speed Limit Maximum Pilot Pressure | |
|
|
|
|
Boom Down Regeneration Valve Maximum Pilot Pressure | |
|
|
|
|
Tool Program Hydraulic Temperature High Warning Event Threshold | |
|
|
|
|
Attachment Valve #1 Parameters | |||||
Tool Program Attachment Valve #1 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #1 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #1 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #1 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #1 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #1 | |
|
|
|
|
Tool Program Attachment Valve #1 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #1 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Attachment Valve #2 Parameters | |||||
Tool Program Attachment Valve #2 Flow Setting | |
|
|
|
|
Tool Program Attachment Valve #2 Multi- Operation Additional Flow | |
|
|
|
|
Tool Program Attachment Valve #2 One Way/ Two Way Valve Mode | Two-Way | Two-Way | Two-Way | Two-Way | Two-Way |
Tool Program Attachment Valve #2 Maximum Extend Pressure | |
|
|
|
|
Tool Program Attachment Valve #2 Maximum Retract Pressure | |
|
|
|
|
Multiple Operation Maximum Extend Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Multiple Operation Maximum Retract Pilot Pressure for Attachment Valve #2 | |
|
|
|
|
Tool Program Attachment Valve #2 Open Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Close Time | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec | 0.20 sec |
Tool Program Attachment Valve #2 Tool Flow Direction | Normal | Normal | Normal | Normal | Normal |
Caterpillar Information System:
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System One-Way/One or Two Pump - Electric Control: Default Value of Work Tool Parameters
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control: Relief Valve (Line) - Test and Adjust
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Combined Function - Electric Control: Default Value of Work Tool Parameters
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Medium Pressure Hydraulic System
C15 Industrial Engines Product Description
2014/12/12 Proper Installation of Connecting Rod Bearings for G3600, 3600, and C280 Engines {1225}
2011/02/17 Replacing the Lock Assembly on Certain Generator Sets {7274}
C4.4 Industrial Engine Radiator - Clean
3516C Locomotive Engines Engine Oil Pump - Assemble
3516C Locomotive Engines Engine Oil Pump - Disassemble
3516C Locomotive Engines Engine Oil Pump - Install
CG137-08 and CG137-12 Industrial Engines Engine Control Panel
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System Two-Way/One Pump - Electric Control: Relief Valve (Line) - Test and Adjust
CG137-08 and CG137-12 Industrial Engines Engine Timing Does Not Match Programmed Timing
C18 Fire Pump Engine Refill Capacities
CG137-08 and CG137-12 Industrial Engines ECM - Replace
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905} 9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490} EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
G3304B and G3306B Engines Gas Pressure Regulator
C175-16 Marine Engines Electronic Control Module (ECM)
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950} Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950} Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Mobil-TracSystems/MTS {4198} Mobil-TracSystems/MTS {4198}
3516C and C175-16 Engines Selective Catalytic Reduction System Overview