Monitoring System
Show/hide table
 |
|
如果已选择停机模式,同时警告指示灯已工作，发动机可能在短到自警告指示灯开始工作后的20秒钟内停机。 取决于应用不同，应采取特殊的预防措施以避免人身伤害。 如有必要，发动机可在紧急操纵停机后重新起动。 |
Show/hide table
| 注意 |
|---|
|
发动机监测系统不能保证防止突然的事故的发生。 编程设定的延迟和减额程序是设计来最大限度减少错误警报和提供操作人员使发动机停机的时间。 |
监测下列参数：
- 冷却液温度
- 机油压力
- 发动机转速/正时
如需更多信息资料或维修帮助，请咨询您的 Caterpillar 代理商。
Caterpillar Information System:
C7.1 (Mech) Industrial Engine Welding on Engines with Electronic Controls
C7.1 (Mech) Industrial Engine Fluid Recommendations - Lubricant Information
C7.1 (Mech) Industrial Engine Fluid Recommendations - Fuel Recommendations
C7.1 (Mech) Industrial Engine Fluid Recommendations - Coolant Information
2010/12/13 The Air Starting Motor Group Is Now Improved on Certain C9 and C18 Engines {1451}
C15 and C18 Engines Diesel Particulate Filter Regeneration
UPSB220 Uninterruptible Power Supply Glossary
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner - Alternator and Compressor
C27 and C32 Engines Turbocharger - Remove and Install
3516B Marine Auxiliary Engine Air Lines
C7.1 (Mech) Industrial Engine Fuel System - Prime
C27 and C32 Industrial Engines Electronic Unit Injector - Install
C7.1 (Mech) Industrial Engine Overspeed
C7.1 (Mech) Industrial Engine Sensors and Electrical Components
C1.5 and C2.2 Industrial Engines Product Lifting
C7.1 (Mech) Industrial Engine Reference Information
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200} Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
2011/02/02 New Water Pump on 3024C, C1.1, C1.5 and C2.2 Engines {1355, 1361}
C1.5 and C2.2 Industrial Engines Plate Locations and Film Locations
C27 and C32 Engines Exhaust Manifold - Remove and Install
UPSB220 Uninterruptible Power Supply Product Location
UPSB220 Uninterruptible Power Supply Cable Routing
UPSB220 Uninterruptible Power Supply Circuit Breaker Recommendation
UPSB220 Uninterruptible Power Supply Component Location