Exhaust Piping - Check
Show/hide table
 |
|
Vroče olje in vroče komponente lahko povzročijo telesne poškodbe. Pred izvedbo postopkov vzdrževanja motorja počakajte, da se motor in komponente motorja popolnoma ohladijo. |
Preglejte sestavne dele izpušnega sistema. Popravite ali zamenjajte sestavne dele, če opazite karkoli od naslednjega:
- poškodbe,
- razpoke,
- puščanja,
- zrahljane povezave.
Če želite več informacij o odstranjevanju in namestitvi, glejte Servisni priročnik, "Disassembly and Assembly". Obrnite se na prodajalca družbe Caterpillar.
Caterpillar Information System:
3512C HD Locomotive Engine Emissions Warranty Information
C7.1 (Mech) Industrial Engine Fuel Filter Base - Secondary Fuel Filter Base
C7.1 (Mech) Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
3512C HD Locomotive Engine Starting Motor - Inspect - If equipped
C7.1 (Mech) Industrial Engine Fuel System Pressure - Test
C7.1 (Mech) Industrial Engine Vibration Damper and Pulley
C7.1 (Mech) Industrial Engine Cylinder Head
3516B HD Generator Set Cooling System Coolant Sample (Level 1) - Obtain
G3516 Petroleum Engine Coolant Sample (Level 1) - Obtain
D6T Track-Type Tractor Burn Prevention
G3516 Power Module Coolant Level - Check
PMG3516 Power Module Coolant (DEAC) - Change
PMG3516 Power Module Fuel Filter Differential Pressure - Check
C27 and C32 Generator Sets Generator Winding - Test
3512C HD SR500 Generator Sets Generator Winding Insulation - Test
G3406 Engine Inlet Air System - Check
3500 Generator Sets Space Heater - Test
G3516 Power Module Spark Plugs - Inspect/Replace - Spark Plugs that have Precombustion Chambers
G3500 Generator Sets Stator Winding Temperature - Test
G3406 and G3412 Generator Sets Varistor - Inspect
C1.5 and C2.2 Industrial Engines Diagnostic Lamp
C1.5 and C2.2 Industrial Engines Fault Logging
C1.5 and C2.2 Industrial Engines Engine Operation with Active Diagnostic Codes
C1.5 and C2.2 Industrial Engines Engine Operation with Intermittent Diagnostic Codes