Vibration Damper and Pulley
Show/hide table
| |
| 图 1 | g02260014 |
|
典型示例 | |
(1) 将减振器固定螺钉拧紧至以下扭矩。 ...
(2)减振器
(3) 将接盘固定螺钉拧紧至以下扭矩。 ...
必须转动 120 度拧紧固定螺钉 (3)。
(4)曲轴适配器和皮带轮
Caterpillar Information System:
C7.1 (Mech) Industrial Engine Cylinder Head
3516B HD Generator Set Cooling System Coolant Sample (Level 1) - Obtain
G3516 Petroleum Engine Coolant Sample (Level 1) - Obtain
D6T Track-Type Tractor Burn Prevention
G3516 Power Module Coolant Level - Check
PMG3516 Power Module Coolant (DEAC) - Change
2010/09/22 Oil Drain Adapter on Certain C6.6 and C4.4 Generator Sets {1372}
2010/10/06 Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed {1350, 1352, 1395}
C7.1 (Mech) Industrial Engine Fuel System
C7.1 (Mech) Industrial Engine Crankshaft
C7.1 (Mech) Industrial Engine Fan Drive
C7.1 (Mech) Industrial Engine Electric Starting Motor
C7.1 (Mech) Industrial Engine Fuel System Pressure - Test
3512C HD Locomotive Engine Starting Motor - Inspect - If equipped
C7.1 (Mech) Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
C7.1 (Mech) Industrial Engine Fuel Filter Base - Secondary Fuel Filter Base
3512C HD Locomotive Engine Emissions Warranty Information
G3306B Generator Sets Exhaust Piping - Check
PMG3516 Power Module Fuel Filter Differential Pressure - Check
C27 and C32 Generator Sets Generator Winding - Test
3512C HD SR500 Generator Sets Generator Winding Insulation - Test
G3406 Engine Inlet Air System - Check
3500 Generator Sets Space Heater - Test
G3516 Power Module Spark Plugs - Inspect/Replace - Spark Plugs that have Precombustion Chambers