Engine Oil Pump for C6.6 Engines {1304}
- Industrial Engine:
- C6.6 (S/N: 6661-UP)
- Generator Set:
- C6.6 (S/N: SDA1-UP; N6D1-UP; MRW1-UP)
Description of Change:
Show/hide table
 | |
| Illustration 1 | g02214073 |
Typical example | |
Show/hide table
 | |
| Illustration 2 | g02214074 |
Typical example | |
Engine oil pump (1) has replaced engine oil pump (4). Engine oil pump (1) has M6 screws (3). Engine oil pump (4) has M8 screws (6) .
Adaptable To: 312-4545 Oil Pump (1) has replaced 293-5250 Oil Pump As (4) .
For 312-4545 Oil Pump (1), tighten screws (3) to a torque of 9.5 N·m (84 lb in). Tighten screws (2) to a torque of 22 N·m (16 lb ft).
For 293-5250 Oil Pump (4), tighten screws (6) to a torque of 9.5 N·m (84 lb in). Tighten screws (5) to a torque of 22 N·m (16 lb ft).
For the correct procedure to install the engine oil pump, refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
C7.1 Industrial Engine Clean Emissions Module
C15 and C18 Engines Monitoring System
C27 Petroleum Generator Set Engines Direct Fuel Control Mode - Test
C18 Marine Engine Sensors and Electrical Components - Engines With Less Than 1000 HP
C27 Petroleum Generator Set Engines Speed Control - Test
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
C27 Petroleum Generator Set Engines Diagnostic Trouble Codes
C27 and C32 Industrial Engines Engine Oil Cooler - Remove and Install
C27 Petroleum Generator Set Engines Shutdown - Test
2010/12/16 A New Throttle is Used on some G3516B Engines {1265}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239} Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239}
C27 Petroleum Generator Set Engines Crankcase Pressure Is High
C15 and C18 Tier 4 Final Engines Electronic Control System Components
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System System Pressure - Release
C3.4B Engines System Overview
Procedure for Installing the 3N-8468 Clamp As on the Auxiliary Water Pump of Certain Marine Engines{1371} Procedure for Installing the 3N-8468 Clamp As on the Auxiliary Water Pump of Certain Marine Engines{1371}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Flashing Messages
C7.1 Industrial Engine ARD Fuel System - Flush - Clean Emissions Module
C7.1 Industrial Engine Diesel Particulate Filter - Clean
2010/10/06 A New Air Filter Change Indicator Group Is Used on C175-16 Generator Set {7452}
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators System Components
C1.5 and C2.2 Industrial Engines Cold Weather Operation
C27 and C32 Industrial Engines Flywheel Housing - Remove and Install