Varistor - Inspect
必须在正常间隔检查变阻器。 物理故障迹象表明有必要更换变阻器。
Caterpillar Information System:
Rework Procedure for the Connection of Speed Adjust Circuit to Control Panels on Certain C4.4Powered Generating Sets{7332, 7451} Rework Procedure for the Connection of Speed Adjust Circuit to Control Panels on Certain C4.4Powered Generating Sets{7332, 7451}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225} Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C175 Generator Sets Space Heater - Test
C175 Generator Sets Engine Valve Lash - Check
C175 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C175 Generator Sets Coolant Sample (Level 2) - Obtain
C175 Generator Sets Coolant Sample (Level 1) - Obtain
C175 Generator Sets Coolant Level - Check
C175 Generator Sets Coolant Extender (ELC) - Add
C175 Generator Sets Coolant (ELC) - Change
C18 Marine Generator Set Overhaul (Major)
Idler Oil Fill Volume {4159, 4159} Idler Oil Fill Volume {4159, 4159}
C13, C15, and C18 Tier 4 Interim Engines Cat ET Service Features
C15 and C18 Engines Compression Brake - Inspect/Adjust/Replace
C4.4 Industrial Engine Air Inlet and Exhaust System - Inspect
C4.4 Industrial Engine Valve Mechanism Cover
C27 and C32 Engines for Caterpillar Built Machines Electronic Control System Components
C9.3 Engines for Caterpillar Built Machines Unit Injector - Remove
Rework Procedure for the Connection of Engine Harness to Engine Interface Module (EIM) Fitted to Certain C2.2, C3.3, C4.4, and C6.6 Powered Generating Sets{1901, 7451} Rework Procedure for the Connection of Engine Harness to Engine Interface Module (EIM) Fitted to Certain C2.2, C3.3, C4.4, and C6.6 Powered Generating Sets{1901, 7451}
C15 and C18 Engines Grounding Stud - Inspect/Clean/Tighten
C15 and C18 Engines Valve Actuators - Check
C27 and C32 Tier 4 Engines Sensor Supply - Test
3516C Generator Sets Coolant (DEAC) - Change