C18 Marine Engines Caterpillar


Model View Illustrations

Usage:

C18 C1J



图 1g00905077

典型范例(右侧保养)

热交换器式冷却系统

(1) 控制面板

(2) 空气滤清器维修指示灯

(3) 空气滤清器

(4) 膨胀水箱加注口盖。

(5) 膨胀箱

(6) 热交换器

(7) 水泵(水套水)

(8) 交流发电机皮带张紧器

(9) 交流发电机

(10) 电路断路器/重设

(11) 燃料滤清器

(12) 燃油注油泵

(13) 发动机机油滤清器

(14) 船用变速箱油冷却器

(15) 电起动马达

(16) 机油加注口

(17) 手动油池泵

(18) 发动机机油油位表(油尺)

(19) 发动机机油冷却器




图 2g00905079

典型范例(右侧保养)

热交换器式冷却系统

(20) 后冷器

(21) 空气滤清器

(22) 空气滤清器堵塞指示灯

(23) 飞轮壳

(24) 后冷器冷凝水排放阀

(25) 电控模块(ECM)

(26) 曲轴箱通风系统滤清器

(27) 滤清器更换指示灯

(28) 燃油输油泵

(29) 海水泵




图 3g01037789

典型范例(右侧保养)

商业应用

龙骨冷却系统

(1) 控制面板

(2) 吊耳

(3) 空气滤清器维修指示灯

(4) 水温调节器壳体

(5) 空气滤清器

(6) 水接头壳体

(6A) 出水口

(6B) 进水口

(7) 曲轴减振器

(8) 水泵(水套水)

(9) 燃油注油泵

(10) 发动机机油冷却器

(11) 机油油位表

(12) 机油加注口

(13) 起动马达




图 4g01037791

典型范例(右侧保养)

商业应用

龙骨冷却系统

(14) 后冷器

(15) 空气滤清器

(16) 空气滤清器堵塞指示灯

(17) 双机油滤清器组件

(18) 曲轴箱通风系统滤清器

(19) 滤清器更换指示灯

(20) 燃油输油泵

(21) 海水泵

Caterpillar Information System:

C18 Marine Engines Zinc Rods - Inspect/Replace
C18 Marine Engines Maintenance Recommendations
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
Removing the 2W-1055 Elbow {1307} Removing the 2W-1055 Elbow {1307}
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
C9.3 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Wellhead or Natural Gas and Have a Compression Ratio of 9.2:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Natural Gas and Have a Compression Ratio of 10.5:1 or 11:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That use Bio-Gas
C4.4 Industrial Engine Fuel Injection Lines
C6.6 Industrial Engine Rocker Shaft - Disassemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C18 Marine Engine Cooling System Coolant (DEAC) - Change
C18 Marine Engine Cooling System Coolant (ELC) - Change
C6.6 Industrial Engine Rocker Shaft - Assemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Install
C4.4 Industrial Engine Engine Oil Pressure Sensor
C6.6 Industrial Engine Cylinder Head - Remove
C6.6 Industrial Engine Cylinder Head - Install
C4.4 Industrial Engine Speed/Timing Sensor
C6.6 Industrial Engine Lifter Group - Remove and Install - Hydraulic Lifter Group
C4.4 Industrial Engine Inlet Manifold Temperature Sensor
C6.6 Industrial Engine Camshaft - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.