C4.4 Industrial Engine Caterpillar


Fuel Injection Lines

Usage:

C4.4 448

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g02334261
Typical example

(1) ( 2) Torque for the nuts on the high-pressure fuel lines ... 55 N·m (41 lb ft)

Caterpillar Information System:

C6.6 Industrial Engine Rocker Shaft - Disassemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350} Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350}
C4.4 Industrial Engine Fuel Injection Pump
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF Inlet, Flame Detect)
C6.6 Industrial Engine Valve Mechanism Cover - Remove and Install
C6.6 Industrial Engine Crankcase Breather - Install
C6.6 Industrial Engine Crankcase Breather - Remove
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C6.6 Industrial Engine Housing (Front) - Install - Heavy Duty Housing (Front)
C7 On-highway Engine Maintenance Interval Schedule - Engines with a Deep Oil Sump
G3600 Engines Maintenance Interval Schedule - G3600 Engines That use Bio-Gas
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Natural Gas and Have a Compression Ratio of 10.5:1 or 11:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Wellhead or Natural Gas and Have a Compression Ratio of 9.2:1
C9.3 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
Removing the 2W-1055 Elbow {1307} Removing the 2W-1055 Elbow {1307}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C18 Marine Engines Maintenance Recommendations
C18 Marine Engines Zinc Rods - Inspect/Replace
C18 Marine Engines Model View Illustrations
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C18 Marine Engine Cooling System Coolant (DEAC) - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.