Temperature Sensor (DPF Inlet, Flame Detect)
Show/hide table
Illustration 1 | g02560180 |
(1) Exhaust combustion group
(3) Diesel particulate filter group |
Show/hide table
Specification for 341-4176 Temperature Sensor Gp | |||
Item | Qty | Part | Specification Description |
2 | 1 | 341-4176 Temperature Sensor Gp | Torque to Before installing the sensor into the Diesel Particulate Filter (DPF), apply the anti-seize compound to the threads of the sensor. Also apply the anti-seize compound to the threads that the sensor will be installed into. Use Never Seez from Bostik “Pure Nickel Special” anti-seize compound. |
- | - | - | Output type is analog/ powered passive. |
- | - | - | Operating voltage is 5.00 ± 0.25 VDC. |
Note:
Caterpillar Information System:
C6.6 Industrial Engine Valve Mechanism Cover - Remove and Install
C6.6 Industrial Engine Crankcase Breather - Install
C6.6 Industrial Engine Crankcase Breather - Remove
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C6.6 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C6.6 Industrial Engine Housing (Front) - Install - Heavy Duty Housing (Front)
C7 On-highway Engine Maintenance Interval Schedule - Engines with a Deep Oil Sump
C6.6 Industrial Engine Housing (Front) - Install
C4.4 Industrial Engine Engine Oil Cooler
C6.6 Industrial Engine Housing (Front) - Remove - Heavy Duty Housing (Front)
C7 On-highway Engine Maintenance Interval Schedule - Engines with a Shallow Oil Sump
C6.6 Industrial Engine Housing (Front) - Remove
C4.4 Industrial Engine Fuel Injection Pump
Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350} Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350}
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
C6.6 Industrial Engine Rocker Shaft - Disassemble
C4.4 Industrial Engine Fuel Injection Lines
G3600 Engines Maintenance Interval Schedule - G3600 Engines That use Bio-Gas
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Natural Gas and Have a Compression Ratio of 10.5:1 or 11:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Wellhead or Natural Gas and Have a Compression Ratio of 9.2:1
C9.3 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
Removing the 2W-1055 Elbow {1307} Removing the 2W-1055 Elbow {1307}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install