Exhaust Gas Valve (NRS) - Remove and Install
拆卸步骤
- 断开卡箍组件 (1) 。 断开线束组件 (2) ,然后断开软管组件 (4) 。 断开卡箍组件 (3) 。
Show/hide table
图 1 | g02150623 |
- 拆下四颗螺栓 (5) ,然后拆下排气阀 (6) 。
Show/hide table
图 2 | g02150662 |
安装步骤
- 按照相反顺序安装排气阀 (6) 。
- 将卡箍组件 (3) 拧紧至扭矩为 8.5 ± 2 N·m (75 ± 18 lb in)。
Caterpillar Information System:
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Wellhead or Natural Gas and Have a Compression Ratio of 9.2:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That Use Natural Gas and Have a Compression Ratio of 10.5:1 or 11:1
G3600 Engines Maintenance Interval Schedule - G3600 Engines That use Bio-Gas
C4.4 Industrial Engine Fuel Injection Lines
C6.6 Industrial Engine Rocker Shaft - Disassemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Remove
Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350} Proper Maintenance of the Cooling Systems of Certain C18 Engines in Marine Applications{1350}
C4.4 Industrial Engine Fuel Injection Pump
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF Inlet, Flame Detect)
C6.6 Industrial Engine Valve Mechanism Cover - Remove and Install
C6.6 Industrial Engine Crankcase Breather - Install
C6.6 Industrial Engine Crankcase Breather - Remove
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (NRS Absolute)
Removing the 2W-1055 Elbow {1307} Removing the 2W-1055 Elbow {1307}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install
C18 Marine Engines Maintenance Recommendations
C18 Marine Engines Zinc Rods - Inspect/Replace
C18 Marine Engines Model View Illustrations
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C18 Marine Engine Cooling System Coolant (DEAC) - Change
C18 Marine Engine Cooling System Coolant (ELC) - Change
C6.6 Industrial Engine Rocker Shaft - Assemble
C6.6 Industrial Engine Rocker Shaft and Pushrod - Install
C4.4 Industrial Engine Engine Oil Pressure Sensor