Inlet Manifold Temperature Sensor
Show/hide table
| |
| Illustration 1 | g02150749 |
|
Typical example | |
(1) Tighten the sensor to the following torque. ...
Caterpillar Information System:
C6.6 Industrial Engine Lifter Group - Remove and Install - Hydraulic Lifter Group
C4.4 Industrial Engine Speed/Timing Sensor
C6.6 Industrial Engine Cylinder Head - Install
C6.6 Industrial Engine Cylinder Head - Remove
C4.4 Industrial Engine Engine Oil Pressure Sensor
C6.6 Industrial Engine Rocker Shaft and Pushrod - Install
C6.6 Industrial Engine Rocker Shaft - Assemble
C18 Marine Engine Cooling System Coolant (ELC) - Change
C18 Marine Engine Cooling System Coolant (DEAC) - Change
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C18 Marine Engines Model View Illustrations
C18 Marine Engines Zinc Rods - Inspect/Replace
C6.6 Industrial Engine Camshaft - Remove and Install
C6.6 Industrial Engine Camshaft Gear - Remove and Install
C4.4 Industrial Engine Boost Pressure Sensor
C4.4 Industrial Engine Water Pump
C6.6 Industrial Engine Camshaft Bearings - Remove and Install
C6.6 Industrial Engine Engine Oil Pan - Install - Aluminum Oil Pan
C6.6 Industrial Engine Engine Oil Pan - Remove - Aluminum Oil Pan
C6.6 Industrial Engine Engine Oil Pan Plate - Remove and Install - Aluminum Oil Pan
C4.4 Industrial Engine Balancer
C6.6 Industrial Engine Piston Cooling Jets - Remove and Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Transmission Oil Lines
C6.6 Industrial Engine Pistons and Connecting Rods - Remove