793F Off-Highway Truck Caterpillar


Cable (Truck Body Retaining) - Inspect

Usage:

793F D3T

------ PERINGATAN! ------

Bak (bed) yang sedang naik dapat terjatuh tanpa diduga apabila menggunakan kabel yang telah rusak. Penggunaan kabel yang telah rusak dapat mengakibatkan cedera atau bahkan kematian.

Periksa kabel terhadap kerusakan dan jangan menggunakan kabel yang telah rusak.

Kenakan sarung tangan sewaktu bekerja dengan kabel.


  1. Siapkan alat berat untuk perawatan. Gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Mempersiapkan Alat Berat untuk Perawatan".

  2. Periksa kabel penahan terhadap kondisi-kondisi berikut:

    • Berkurangnya diameter

    • Serat kabel ada yang putus

    • Serat kabel ada yanga aus

    • Serat kabel ada yang telah berkarat

    • Anyaman kabel telah terurai atau serat kabel telah longgar.

    • Ujung kabel telah longgar atau terjadi pemisahan antara kabel dan ujung kabel

    • Tertekuk

    • Terpotong

    • Tergilas

  3. Periksa ujung-ujung kabel penahan dan sambungan kabel ke bak truk terhadap kondisi-kondisi berikut:

    • Distorsi seperti bengkok atau terbelit

    • Aus

    • Korosi

    • Retak atau putus

  4. Periksa pin penahan dan perangkat pengunci terhadap kondisi-kondisi berikut:

    • Distorsi seperti bengkok atau terbelit

    • Aus

    • Korosi

    • Retak atau putus

Jika terjadi salah satu kondisi di atas, ganti suku cadang yang terkait. Konsultasikan dengan dealer Caterpillar Anda untuk penggantian suku cadang yang benar.

Caterpillar Information System:

793F Off-Highway Truck Cab Air Filter - Clean/Replace
G3304B and G3306B Engines Sensor Signal (Analog, Passive) - Test
793F Off-Highway Truck Engine Supplement Fuel Priming Pump - Remove and Install
3508, 3512 and 3516 Generator Set Engines Air Inlet Shutoff - Remove and Install
An Incorrect Check Valve Has Been Used in Certain 2007 On-Highway Truck Engines{1262} An Incorrect Check Valve Has Been Used in Certain 2007 On-Highway Truck Engines{1262}
C4.4 Industrial Engine Ordering Replacement Parts
Diagnostic Process for Fuel Rail Pressure Sensor{1718} Diagnostic Process for Fuel Rail Pressure Sensor{1718}
3508, 3512 and 3516 Generator Set Engines Manual Shutoff - Remove and Install
Installation of the Bracket for a Fuel Injection Line for Certain C7 Engines{1252, 1254} Installation of the Bracket for a Fuel Injection Line for Certain C7 Engines{1252, 1254}
C7.1 Industrial Engine and Generator Set Valve Position Sensor - Test
3508, 3512 and 3516 Generator Set Engines Alternator - Remove and Install
C7.1 Industrial Engine and Generator Set Intake Manifold Air Pressure Is Low
3508C, 3512C, and 3516C Locomotive Engines Configuration Parameters
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Temperature Is Low
797F and 797F XQ Off-Highway Truck Hydraulic System Gear Pump (Brake Cooling, Hoist)
G3304B and G3306B Engines Carburetor (High Pressure Gas) - Adjust
320D Excavator Rollover Protective Structure (ROPS) - Inspect
G3304B and G3306B Engines Engine Timing Does Not Match Programmed Timing
793F Off-Highway Truck Differential and Final Drive Oil - Inspect
G3520E Generator Set Engines Sensor Signal (PWM) - Test
793F Off-Highway Truck Indicators and Gauges - Test
G3304B and G3306B Engines Electrical Power Supply - Test
793F Off-Highway Truck Display and Camera - Clean - If Equipped
C7.1 Industrial Engine and Generator Set Welding Precaution
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.