New " Drive 6V94 Universal Joint Is Available{0612,1253}
Usage:
A 3/8" drive 6V94 Universal Joint (see the Illustration) is available and is shorter than the standard 3/8" drive universal joints. It is 1.56" (39.6 mm) long. The new universal joint can be used with 3/8" drive sockets and drive handles, and is especially useful in applications where access to fasteners is difficult. For example: the fuel pump housing on 3408 and 3412 Engines.
Caterpillar Information System:
1979/04/23 Dowtherm Test Strips No Longer Available{0651,1350}
1979/04/23 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage{1304}
1979/04/23 New Oil Cooler Bonnets Used On 3408 And 3412 Engines{1378,1354,1380}
1979/04/23 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/16 90° Elbows On Quick Disconnect Couplers Make Installation Easier{0690}
1979/04/16 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16 Testing And Adjusting Procedure For 5P4210 Modular Cab Tilting Cylinder And Valve{0620}
1979/04/09 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal{1160,1161}
1979/04/09 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/09 Serial Numbers Used Instead Of Test Numbers On Power Shift Transmissions{3150,7557}
1979/04/09 Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09 6V112 Repair Kit Available For Parts Service Of The 8H8558 Nut Spinner{0611}
1979/04/30 2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30 The Service Life Of A Power Shift Transmission Is In Direct Relation To The Maintenance Of Its Lubrication System{3004,3179,3150}
1979/04/30 New Ring Gears Used In Flywheel Assemblies{1158}
1979/04/30 Seals (Double-Lip Type) Made Of Viton Material Are Now Used In Vickers Pumps Which Have Steel-Backed Bronze Plates Between Rotor And End Plates{5055}
1979/04/30 Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block{1157,1201}
1979/04/30 Liner Seat Insert Now Available{1217}
1979/04/30 New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/05/07 New 6V116 Water Sleeve Removal Tool Is Available{0621,1101}
1979/05/07 New Hose Assembly Will Give Longer Service Life With High Oil Temperatures{3314}
1979/05/07 Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07 Change In Part Number Of Water Temperature Regulator Used In Attachment Oil Cooler Groups{1355,1378}
1979/05/07 An Ammeter Calibration Group Is Now Available{0651}