New Ring Gears Used In Flywheel Assemblies{1158}
Usage:
Most 3304 and 3306 Vehicular Engines;
3306 Industrial Engines
Description of Change: Two new ring gears, that are flame hardened, are used in the flywheel assemblies on most 3304 and 3306 Vehicular Engines and 3306 Industrial Engines. The new ring gears are made from a different material and have more resistance to "chipping" than the former ring gears.
Adaptable As: The new ring gears are a direct replacement for the former ring gears, which have been canceled.
NOTE: If a flywheel assembly is ordered, the new ring gear will be sent automatically.
Caterpillar Information System:
1979/04/30 The Service Life Of A Power Shift Transmission Is In Direct Relation To The Maintenance Of Its Lubrication System{3004,3179,3150}
1979/04/30 2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30 New " Drive 6V94 Universal Joint Is Available{0612,1253}
1979/04/23 Dowtherm Test Strips No Longer Available{0651,1350}
1979/04/23 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage{1304}
1979/04/23 New Oil Cooler Bonnets Used On 3408 And 3412 Engines{1378,1354,1380}
1979/04/23 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/16 90° Elbows On Quick Disconnect Couplers Make Installation Easier{0690}
1979/04/16 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16 Testing And Adjusting Procedure For 5P4210 Modular Cab Tilting Cylinder And Valve{0620}
1979/04/09 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal{1160,1161}
1979/04/09 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/30 Seals (Double-Lip Type) Made Of Viton Material Are Now Used In Vickers Pumps Which Have Steel-Backed Bronze Plates Between Rotor And End Plates{5055}
1979/04/30 Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block{1157,1201}
1979/04/30 Liner Seat Insert Now Available{1217}
1979/04/30 New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/05/07 New 6V116 Water Sleeve Removal Tool Is Available{0621,1101}
1979/05/07 New Hose Assembly Will Give Longer Service Life With High Oil Temperatures{3314}
1979/05/07 Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07 Change In Part Number Of Water Temperature Regulator Used In Attachment Oil Cooler Groups{1355,1378}
1979/05/07 An Ammeter Calibration Group Is Now Available{0651}
1979/05/07 New Oil Pump Has Improved Relief Valve For Better Pressure Control{1304}
1979/05/07 Serialized Attachments Added To Machine Parts Books{0375}
1979/05/14 New BrakeSaver Manifold Prevents Oil Leakage{1155}