6V112 Repair Kit Available For Parts Service Of The 8H8558 Nut Spinner{0611}
Usage:
The 6V112 Repair Kit is now available for parts service of the 8H8558 Nut Spinner. Formerly, if the spinner's square drive (head) was damaged, you had to replace the complete spinner. The repair kit consists of a head, a pin and a spring washer. See the Illustration.
6V112 Repair Kit and Handle.
To remove the old parts, first drive the pin out of the handle. Use caution when the head is removed so the spring washer does not fly out. Use all the new parts in the kit to repair the nut spinner. Do not use any of the old parts. Put the new spring washer and the new head in position in the handle. When the holes are in alignment, install the pin.
Caterpillar Information System:
1979/04/02 Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02 Improved Fuel Priming Pumps Give Longer Service Life{1258}
1979/04/02 New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02 A 6V198 Container Kit Is Available To Repair The 5P6225 Transmission Hydraulic Test Group{0651}
1979/03/26 FT1441 Drawing Available To Fabricate A Seal Installer For The 5P7143 Duo-Cone Seal Group{0622}
1979/03/26 A Reverse Connection Of Oil Filter Hoses Can Cause Bearing Failures{1230,1307,1306}
1979/03/26 Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26 6V852 Dust Cap Is Available For Protection Of 5P9711 And 5P9714 Nipple Assemblies{0651}
1979/03/26 Replacement Bushing Available For Cast Iron Rocker Arms Only{1102}
1979/03/26 New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26 New Fabricated Tools Available For Service Work On 7211 And 7221 Marine Transmissions{0621,0622,3302,3305}
1979/03/26 Drawing Available For FT1439 Lifting Beam{0644}
1979/04/09 Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09 Serial Numbers Used Instead Of Test Numbers On Power Shift Transmissions{3150,7557}
1979/04/09 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/09 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal{1160,1161}
1979/04/16 Testing And Adjusting Procedure For 5P4210 Modular Cab Tilting Cylinder And Valve{0620}
1979/04/16 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16 90° Elbows On Quick Disconnect Couplers Make Installation Easier{0690}
1979/04/23 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23 New Oil Cooler Bonnets Used On 3408 And 3412 Engines{1378,1354,1380}
1979/04/23 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage{1304}
1979/04/23 Dowtherm Test Strips No Longer Available{0651,1350}
1979/04/30 New " Drive 6V94 Universal Joint Is Available{0612,1253}