- Excavator:
- 320D (S/N: MDE1-UP; DHK1-UP; FXK1-UP; GKL1-UP; CXY1-UP; EBY1-UP; JGZ1-UP)
- Machine Control and Guidance Products:
- CAES ULTRA (S/N: 2TZ1-UP)
- 323D (S/N: SDC1-UP; CYD1-UP; PBM1-UP; DKW1-UP)
- 324D (S/N: LAB1-UP; EJC1-UP; T2D1-UP; JJG1-UP; JGK1-UP; SYM1-UP; DFP1-UP; JKR1-UP; JLS1-UP; CJX1-UP)
- 325D (S/N: GPB1-UP; PKE1-UP; KDG1-UP; C4H1-UP; C7K1-UP; RJK1-UP; C8L1-UP; MCL1-UP; PAL1-UP; AZP1-UP; A3R1-UP; GBR1-UP; LWR1-UP; SCR1-UP; T2S1-UP; CYW1-UP; CSM1-UP)
- 330D (S/N: GBC1-UP; NBD1-UP; GGE1-UP; B6H1-UP; THJ1-UP; C5K1-UP; E4K1-UP; H3K1-UP; L2K1-UP; PEL1-UP; JJM1-UP; LEM1-UP; ERN1-UP; JLP1-UP; MWP1-UP; HAS1-UP; RAS1-UP; EDX1-UP; MEY1-UP; T2Y1-UP)
- 345C (S/N: KBA1-UP; TBA1-UP; FPC1-UP; SPC1-UP; ESD1-UP; WDE1-UP; AYF1-UP; CWG1-UP; TDG250-UP; GPH1-UP; TAJ1-UP; A3L1-UP; GCL1-UP; BZN1-UP; DHP1-UP; GJR1-UP; M2R1-UP; D3S1-UP; ELS1-UP; LYS1-UP; PJW350-UP; CPX1-UP; BWY1-UP)
- 365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
- 385C (S/N: EDA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
ReferenceOperation and Maintenance Manual, SEBU8501, "AccuGrade GPS (CD700) for HEX"
ReferenceSystems Operation, Troubleshooting, Testing and Adjusting, KENR8977, "AccuGrade GPS (CD700) for HEX"
ReferenceSpecial Instruction, REHS4648, "Installation of the AccuGrade Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators"
ReferenceSpecial Instruction, REHS3256, "CAESultra Installation for Excavators"
ReferenceSpecial Instruction, REHS3697, "CAESultra Installation for Hydraulic Front Shovels"
Improved Angle Sensors
The new 312-0754 Position Sensor As and the dual axis 312-0755 Position Sensor As are now available.
Illustration 1 | g01849378 |
(1) 312-0754 Position Sensor As (2) 322-0221 Housing Bracket (3) 322-0222 Cover (4) 312-0755 Position Sensor As (5) 292-4538 Adapter As |
Refer to Table 1 for information on the replacement sensors and brackets.
System     | Former Sensor     | New Sensor     | New Bracket     | New Cover Plate     | Adapter (CAES)     |
AccuGrade     | 265-8059     | 312-0754     | 322-0221     | 322-0222     | N/A     |
CAES     | 243-4115     | 312-0755     | 322-0221     | 322-0222     | 292-4538     |
    | 243-4116 243-4117 243-4118     |
312-0754     | 322-0221     | 322-0222     |     |
The improved 312-0754 Position Sensor As replaces the former 265-8059 Position Sensor As .
The 312-0754 Position Sensor As uses a new 322-0221 Housing Bracket and 322-0222 Cover for installation on AccuGrade Systems. On a CAES system, an additional 292-4538 Adapter As is required in order to mount both the 312-0754 Position Sensor As and the 312-0755 Position Sensor As .
The new sensors are supported with Caterpillar Electronic Technician (ET). The sensors can also be upgraded with the display. Also, these new sensors are fully supported in the AccuGrade version 11 software.
When you replace a 312-0754 Position Sensor As on an AccuGrade System with a new 312-0754 Position Sensor As, you do not need to calibrate the new sensor. If you are replacing a 265-8059 Position Sensor As with an 312-0754 Position Sensor As the new sensor will need to be calibrated. The calibrations for the 312-0754 Position Sensor As are stored in the display.
If you are replacing a 243-4115 Position Sensor, 243-4116 Inclination Sensor, 243-4117 Inclination Sensor or a 243-4118 Inclination Sensor on a CAES system with a 312-0754 Position Sensor As or 312-0755 Position Sensor As, the new sensor needs to be calibrated. The calibration data is stored in the "configuration.ini" file that is located on the D3:C4 Nav 10.4 display. For additional information on mounting and configuring the sensors, refer to Special Instruction, REHS3256, "CAESultra Installation for Excavators" or Special Instruction, REHS3697, "CAESultra Installation for Hydraulic Front Shovels".