Camshaft
Show/hide table
Illustration 1 | g01515757 |
(1) Left hand camshaft assembly
(2) Right hand camshaft assembly |
(A) Thickness of the groove in new camshaft assembly ...
(B) Extension of the dowel from the rear of the left camshaft assembly ...
(C) Thickness of new thrust washer ...
(D) Dimensions for the bearing journal
- Diameter of bearing journal ...
85.88 ± 0.02 mm (3.381 ± 0.001 inch) - Bore in camshaft bearing after installation ...
86.00 ± 0.06 mm (3.386 ± 0.002 inch) - Bore in camshaft bearing after installation ...
Show/hide table
Illustration 2 | g01460128 |
(E) Camshaft lobe lift
- Inlet lobe ...
7.500 mm (0.2953 inch) - Exhaust lobe ...
8.699 mm (0.3425 inch) - Exhaust lobe ...
In order to determine the actual camshaft lobe lift, use the following procedure:
- Measure camshaft lobe height (F).
- Measure base circle (G).
- Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
Caterpillar Information System:
2009/03/30 A New Actuator Kit (Wastegate) and a New Turbocharger Are Available for Claas Engines {1052, 1053, 1057, 1940}
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0248 - FMI 09
Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287} Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0168 - FMI 04
2009/03/16 A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
G3500B Engines Crankcase Breather
G3500 A3 Engines Cover Group (Front Housing)
C18 Generator Set Fuel System Primary Filter - Replace
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove and Install
Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307} Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307}
G3500B Engines Exhaust Manifold
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Disassemble
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Assemble
2009/03/30 Discoloration of Diesel Fuel {1000, 1250, 1280}
C7.1 Industrial Engine Engine Design
C6.6 Industrial Engine Cylinder Head
C6.6 Industrial Engine Rocker Shaft
C6.6 Industrial Engine Camshaft
C6.6 Industrial Engine Exhaust Manifold
C6.6 Industrial Engine Engine Oil Filter Base
C6.6 Industrial Engine Engine Oil Pump
C6.6 Industrial Engine Water Temperature Regulator and Housing
C7.1 Engines for Caterpillar Built Machines Cylinder Block