Engine Oil Pump
Type ... Gear-driven differential rotor
Number of lobes
- Inner rotor ... 6
- Outer rotor ... 7
Show/hide table
Illustration 1 | g00938064 |
(1) Clearance of the outer rotor to the body ...
Show/hide table
Illustration 2 | g00938061 |
Checking the clearance |
(2) Service limit of inner rotor to outer rotor ...
Show/hide table
Illustration 3 | g00938799 |
Checking the end play |
(3) End play of rotor assembly
- Inner rotor ...
0.050 to 0.180 mm (0.0020 to 0.0071 inch) - Outer rotor ...
0.050 to 0.180 mm (0.0020 to 0.0071 inch) - Outer rotor ...
Show/hide table
Illustration 4 | g02293754 |
Typical example (4) Suction Pipe (6) Bracket for the Suction Pipe |
(5) ( 8) ( 9) ( 10) Tighten the bolts to the following torque. ...
(7) Tighten the bolt to the following torque. ...
Caterpillar Information System:
C6.6 Industrial Engine Engine Oil Filter Base
C6.6 Industrial Engine Exhaust Manifold
C6.6 Industrial Engine Camshaft
C6.6 Industrial Engine Rocker Shaft
C6.6 Industrial Engine Cylinder Head
C7.1 Industrial Engine Engine Design
2009/03/30 Discoloration of Diesel Fuel {1000, 1250, 1280}
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Assemble
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Disassemble
G3500B Engines Camshaft
2009/03/30 A New Actuator Kit (Wastegate) and a New Turbocharger Are Available for Claas Engines {1052, 1053, 1057, 1940}
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C6.6 Industrial Engine Water Temperature Regulator and Housing
C7.1 Engines for Caterpillar Built Machines Cylinder Block
C6.6 Industrial Engine Crankshaft Seals
C6.6 Industrial Engine Connecting Rod Bearing Journal
C6.6 Industrial Engine Connecting Rod
C7.1 Engines for Caterpillar Built Machines Piston Cooling Jet
C7.1 Industrial Engine Water Pump
C4.4 Industrial Engine Gear Group (Front)
C6.6 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Flywheel
C4.4 Industrial Engine Engine Lifting Bracket
2009/04/06 Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}