Crankshaft Seals
You do not need to remove the engine oil pan in order to install the oil seal.
Note: Some engines also have an oil seal that is installed in the flywheel housing. Refer to Specifications, "Flywheel Housing" for more information.
The sequence for installation of the rear oil seal
Show/hide table
Illustration 1 | g01863635 |
Typical example |
(11) ( 12) Torque for the fasteners ...
(1) ( 2) Torque for the fastener ...
Loosen fastener (11) and (12) by one complete turn.
Tighten the fasteners in the sequence that is in illustration 1. Torque for the fasteners ...
The maximum out of concentricity between the crankshaft flange and the outside diameter of the rear seal for the crankshaft. ...
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Cylinder Block
C6.6 Industrial Engine Water Temperature Regulator and Housing
C6.6 Industrial Engine Engine Oil Pump
C6.6 Industrial Engine Engine Oil Filter Base
C6.6 Industrial Engine Exhaust Manifold
C6.6 Industrial Engine Camshaft
C6.6 Industrial Engine Rocker Shaft
C6.6 Industrial Engine Cylinder Head
C7.1 Industrial Engine Engine Design
2009/03/30 Discoloration of Diesel Fuel {1000, 1250, 1280}
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Assemble
CX31-P600 Petroleum Transmission Well Servicing Transmission Planetary - Disassemble
C6.6 Industrial Engine Connecting Rod Bearing Journal
C6.6 Industrial Engine Connecting Rod
C7.1 Engines for Caterpillar Built Machines Piston Cooling Jet
C7.1 Industrial Engine Water Pump
C4.4 Industrial Engine Gear Group (Front)
C6.6 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Flywheel
C4.4 Industrial Engine Engine Lifting Bracket
2009/04/06 Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
Problems with Rough Idle on Certain C15 Truck Engines{1901, 1920} Problems with Rough Idle on Certain C15 Truck Engines{1901, 1920}
C6.6 Industrial Engine Alternator
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Sensor