Exhaust Manifold
Show/hide table
Illustration 1 | g01847274 |
Top view of engine |
Note: Before assembly, lubricate the bearing surfaces and the threads of the bolts, threads of the locknuts and the threads of the plugs with 4C-5599 Anti-Seize Compound.
(1) Before assembly, lubricate the threads of the pipe plugs with 4C-5599 Anti-Seize Compound.
(2) Tighten diagonally opposite bolts simultaneously to
Show/hide table
Illustration 2 | g01853693 |
Right side view of engine |
(3) Torque for the taperlock studs ...
(4) Torque for the bolts ...
Show/hide table
Illustration 3 | g01847294 |
Front view of engine |
Use the following procedure to tighten the nuts for the V-band clamps (5):
- Tighten the nuts to
6.5 ± 2.0 N·m (57.5 ± 17.7 lb in) . - After the engine has been tested, again tighten the nuts to
6.5 ± 2.0 N·m (57.5 ± 17.7 lb in) .
Caterpillar Information System:
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D and 793F Off-Highway Truck Automatic Lubrication System Lubrication Injectors - Adjust
2009/04/06 Special Instruction, REHS3411, "Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp " Is Available {191N}
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Assemble
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Disassemble
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Install
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Remove
Determining the Cause of Fuel Dilution of Engine Oil for On-highway Engines{1250, 1348} Determining the Cause of Fuel Dilution of Engine Oil for On-highway Engines{1250, 1348}
CX31 On-Highway Transmission Power Train Retarder - Assemble
CX31 On-Highway Transmission Power Train Retarder - Disassemble
Measuring Fuel Dilution of On-highway Engines{1250, 1348} Measuring Fuel Dilution of On-highway Engines{1250, 1348}
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install
2013/01/28 Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}
Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307} Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307}
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove and Install
C18 Generator Set Fuel System Primary Filter - Replace
G3500 A3 Engines Cover Group (Front Housing)
G3500B Engines Crankcase Breather
2009/03/16 A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0168 - FMI 04
Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287} Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0248 - FMI 09
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
2009/03/30 A New Actuator Kit (Wastegate) and a New Turbocharger Are Available for Claas Engines {1052, 1053, 1057, 1940}
G3500B Engines Camshaft