Retarder Hydraulic Control Valve - Disassemble
拆解步骤
开始:
- 拆下减速器液压控制阀。 请参阅拆解和装配, "减速器液压控制阀 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1) 和盖 (2) 。
Show/hide table
 | |
| 图 1 | g01846963 |
Show/hide table
 |
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 拆下 O 形密封圈 (3) 。 拆下滑阀 (4) 。
Show/hide table
 | |
| 图 2 | g01846975 |
Show/hide table
 | |
| 图 3 | g01848954 |
Show/hide table
|
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 拆下缓动阀 (5) 、弹簧 (6) 、止动块 (7) 和弹簧 (8) 。
- 拆下螺母 (9) 和垫圈。 拆下线圈组件 (10) 。 拆下芯组件 (11) 。
Show/hide table
 | |
| 图 4 | g01849014 |
- 拆下 O 形密封圈 (12) 。
Show/hide table
 | |
| 图 5 | g01849353 |
- 拆下螺栓 (13) 。 拆下阀体 (14) 和板 (15) 。
Show/hide table
 | |
| 图 6 | g01849395 |
- 拆下 O 形密封圈 (16) 。
Show/hide table
 | |
| 图 7 | g01849536 |
- 拆下螺塞组件 (17) 。 拆下滑阀组件 (18) 。 拆下弹簧 (19) 。 拆下节流孔 (20) 和阀芯 (21) 。
Show/hide table
 | |
| 图 8 | g01849553 |
Show/hide table
|
被弹簧力爆出的零件击中，会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序，并使用所有建议的工具以释放弹簧力。 |
- 拆下 O 型密封圈 (22) 。
Show/hide table
 | |
| 图 9 | g01849561 |
Caterpillar Information System:
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Install
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Remove
Determining the Cause of Fuel Dilution of Engine Oil for On-highway Engines{1250, 1348} Determining the Cause of Fuel Dilution of Engine Oil for On-highway Engines{1250, 1348}
CX31 On-Highway Transmission Power Train Retarder - Assemble
CX31 On-Highway Transmission Power Train Retarder - Disassemble
Measuring Fuel Dilution of On-highway Engines{1250, 1348} Measuring Fuel Dilution of On-highway Engines{1250, 1348}
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install
2013/01/28 Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}
CX31 On-Highway Transmission Power Train Retarder - Install
CX31 On-Highway Transmission Power Train Retarder - Remove
C15 and C18 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Disassemble
2009/06/01 A New Crankshaft Gear, Cluster Gear Assembly, and Crankshaft Assembly Are Now Used {1151, 1162, 1202, 1206}
CX31-P600 Petroleum Transmission Well Servicing Retarder Hydraulic Control Valve - Assemble
2009/04/06 Special Instruction, REHS3411, "Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp " Is Available {191N}
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D and 793F Off-Highway Truck Automatic Lubrication System Lubrication Injectors - Adjust
G3500B Engines Exhaust Manifold
Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307} Procedure to Convert the Oil Supply Line to the Variable Valve Actuators (VVA) on C15 On-Highway Engines{1105, 1130, 1307}
C15 and C18 Industrial Engines Engine Oil Filter Base - Remove and Install
C18 Generator Set Fuel System Primary Filter - Replace
G3500 A3 Engines Cover Group (Front Housing)
G3500B Engines Crankcase Breather
2009/03/16 A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
789D, 793F, and 797F Off-Highway Truck Monitoring System MID 053 - CID 0168 - FMI 04
Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287} Troubleshooting Guide for Leaks in the Vacuum of Certain UPS Systems{4287}