CX31 and CX31 HT On-Highway Transmissions Caterpillar


Torque Converter Housing - Retarder

Usage:

CX31 D9R


图 1g03511401

表 1
技术规格 - 277-6890 变矩器壳体总成和 418-7978 变矩器壳体总成 
项目  数量  零件  技术规格说明 
4H-6112 呼吸器  拧紧至扭矩为 35 ± 3 N·m (26 ± 2 lb ft)。 
6V-2317 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
6V-5843 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
183-3407 螺塞组件  拧紧至扭矩为 18.5 ± 1.0 N·m (163.7 ± 8.9 lb in)。 
5P-8347 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
在安装油底壳密封垫之前。 向 T 形接头上涂覆一条连续的黑色 Loctite RTV 硅 598,然后再安装变矩器壳体油底壳的密封垫。 涂覆密封胶时应将其覆盖到 T 形接头的整个宽度上。 


图 2g03511456

表 2
项目  数量  零件  技术规格说明 
363-2112 唇形密封  干燥安装唇形密封的密封唇。(1) 
8T-5092 螺栓  拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 
287-3144 双头螺柱  拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 
10  172-9966 螺栓  拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 
11  6V-5684 螺栓  拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 
12  172-9966 螺栓  采用下述步骤拧紧螺栓:

1. 拧紧螺栓至 60 ± 5 N·m (44 ± 4 lb ft)
2. 再次转动螺栓 30 ± 3 度。 
13  13  095-0658 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
(1) 对于 (序列号: HTC1-Up) 机器和 (序列号: D9R305-Up) 机器,请勿润滑密封。 对于这两种型号,在压入壳体时,适当润滑外径。

Caterpillar Information System:

CX31-P600 Petroleum Transmission Torque Converter Housing - Side PTO
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electrical Output Components
C175 Generator Sets Glossary
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Pan - Retarder
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Pan - Standard
Failure of the Fan Drive Belt for Certain C32 Engines{1154, 1357, 1359, 1405} Failure of the Fan Drive Belt for Certain C32 Engines{1154, 1357, 1359, 1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405} Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 2448 - FMI 14
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 2448 - FMI 09
2009/02/16 A New Crankshaft Main Bearing Is Used for Certain Industrial Applications {1202}
C175-16 and C175-20 Generator Set Engines Coolant Temperature Control Module - Test
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 1676 - FMI 05
349F and 352F Excavators Machine System Specifications Pilot Valve (Auxiliary)
CX31-P600 Petroleum Transmission Torque Converter Housing - Integral Pump Drive
2009/02/01 Performing a Test Regeneration on Motor Coach Industries (MCI) Buses {1901, 1920}
C4.4 Industrial Engine Turbocharger - Remove - Side Mounted Turbochargers
C4.4 Industrial Engine Turbocharger - Remove - Top Mounted Turbocharger
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Starting System
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM)
2009/06/01 A New Oil Filler Tube Is Now Used {1316}
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0168 - FMI 03
2009/06/29 New Exhaust Bellows Are Used on a 3516B Locomotive Engine {1059}
2009/07/01 3406E and C-15 Low Idle Instability {1251, 1254, 1290, 1713}
C4.4 Industrial Engine Turbocharger - Install - Top Mounted Turbocharger
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.