CX31 and CX31 HT On-Highway Transmissions Caterpillar


Transmission Oil Pan - Retarder

Usage:

CX31 D9R


图 1g03385414
典型示例

表 1
技术规格 - 338-0407 变速箱油底壳总成和 390-1168 变速箱油底壳总成 
项目  数量  零件  技术规格说明 
8C-5230 O 形密封圈  使用润滑剂稍微润滑即将密封的孔。 
309-5131 螺塞组件  拧紧至扭矩为 50 ± 5 N·m (37 ± 4 lb ft)。 
304-9028 管组件  将管组件的两端拧紧至扭矩为 42 ± 2 N·m (31 ± 1 lb ft)。 
175-9106 弯头组件  拧紧至扭矩为 25.25 ± 1.25 N·m (223.48 ± 11.06 lb in)。 
183-3398 接头组件  拧紧至扭矩为 25.25 ± 1.25 N·m (223.48 ± 11.06 lb in)。 
8T-4908 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
8T-4172 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
8T-4196 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
8T-7547 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
10  309-5133 螺塞组件  拧紧至扭矩为 110 ± 5 N·m (81 ± 4 lb ft)。 
11  319-6234 螺塞组件  拧紧至扭矩为 110 ± 5 N·m (81 ± 4 lb ft)。 
12  8T-4200 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
13  8T-4189 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
14  096-5866 螺栓  拧紧至扭矩为 28 ± 7 N·m (248 ± 62 lb in)。 
15  6V-3822 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 
16  24  8T-6466 螺栓  拧紧至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)。 

Caterpillar Information System:

CX31 and CX31 HT On-Highway Transmissions Transmission Oil Pan - Standard
Failure of the Fan Drive Belt for Certain C32 Engines{1154, 1357, 1359, 1405} Failure of the Fan Drive Belt for Certain C32 Engines{1154, 1357, 1359, 1405}
Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405} Installation of the New Alternator Support Assembly on Industrial Engines{1154, 1405}
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 2448 - FMI 14
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 2448 - FMI 09
2009/02/16 A New Crankshaft Main Bearing Is Used for Certain Industrial Applications {1202}
C175-16 and C175-20 Generator Set Engines Coolant Temperature Control Module - Test
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 1676 - FMI 05
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 1675 - FMI 05
345B Excavator Counterweight Removal Chain - Clean - If Equipped
345B Excavator Counterweight Removal Chain - Lubricate - If Equipped
3516C Locomotive Engine Engine Air Cleaner Service Indicator - Inspect - If Equipped
C175 Generator Sets Glossary
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electrical Output Components
CX31-P600 Petroleum Transmission Torque Converter Housing - Side PTO
CX31 and CX31 HT On-Highway Transmissions Torque Converter Housing - Retarder
349F and 352F Excavators Machine System Specifications Pilot Valve (Auxiliary)
CX31-P600 Petroleum Transmission Torque Converter Housing - Integral Pump Drive
2009/02/01 Performing a Test Regeneration on Motor Coach Industries (MCI) Buses {1901, 1920}
C4.4 Industrial Engine Turbocharger - Remove - Side Mounted Turbochargers
C4.4 Industrial Engine Turbocharger - Remove - Top Mounted Turbocharger
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System Starting System
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM)
2009/06/01 A New Oil Filler Tube Is Now Used {1316}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.