2009/02/01 Caterpillar


A New Connecting Rod Bearing is Available {1218, 1219, 1225}

Usage:

3406B 2EK
Engine:
3406B (S/N: 3ZJ1-UP; 8TC1-UP; 2EK1-UP)
3406E (S/N: 5EK1-UP; 6TS1-UP)
C-15 (S/N: MBN1-UP; 6NZ1-UP; 9NZ1-UP)
Truck Engine News SEBD6819, 1 January 2009, "A New Connecting Rod Bearing is Available". Disregard this article. See the article that follows.

A new supplier has been selected in order to produce the new connecting rod bearing. This change has resulted in a new part number. The new bearing is adaptable back to first production on the machines that are listed above.

Refer to Table 1 for the part number of the old bearing and the replacement part number.

Table 1
Old part number     Replacement part number    
4W-5739     328-5572    
9Y-7735     328-5573    
9Y-9497     328-5574    

Caterpillar Information System:

2009/02/16 New Rocker Arms Are Available {1123}
C9 Marine Engines and C9 Marine Generator Sets Flexible Coupling
C9 Marine Engines and C9 Marine Generator Sets Drive Shaft
C18 Industrial Engine Fuel System
349F and 352F Excavators Machine System Specifications Relief Valve (Negative Flow Control)
C18 Fire Pump Engine Safety Messages
C18 Industrial Engine Inlet Manifold Pressure - Test
C18 Industrial Engine Electrical System
C18 Industrial Engine Cooling System
C18 Industrial Engine Air Inlet and Exhaust System
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Speed Sensor (Transmission) - Install
C18 Industrial Engine Electronic Control System Components
2009/02/02 A New Seal Is Used for the Ignition Transformers inG3600 Engines {1550, 7555}
CX31-P600 Petroleum Transmission Well Servicing Relief Valve (Torque Converter Inlet) - Remove and Install
3512B Generator Set Engine Diagnostic Trouble Codes
2009/02/02 Shims Are Now Used in the Carburetors of G3516 Engines {1266}
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Clean/Replace - Metal Sand Filters
2009/02/16 Disposable Paper Air Filters Require Protection {1051, 1054}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0588 - FMI 09
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Pump Drive - Remove
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Pump Drive - Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0600 - FMI 04
2009/02/02 A New Rocker Arm Assembly is Available {1123}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.