Relief Valve (Negative Flow Control)
Show/hide table
| 图 1 | g01572480 |
(1) 螺塞的扭矩 ... 195 ± 20 N·m (145 ± 15 lb ft)
(2) 根据需要，使用下面的垫片。 组装厚垫片，使其接触弹簧端部：
-
5M-9624 垫片
- 数量 ... 2
- 1 个垫片的厚度 ... 0.250 mm (0.0098 in)
-
4J-6806 垫片
- 数量 ... 1
- 垫片厚度 ... 1.22 mm (0.048 in)
(3) 122-7748 弹簧
- 在试验力下的长度 ... 54.45 mm (2.144
in)
- 试验力 ... 929.67 ± 46.50 N (209.0 ± 10.5 lb)
- 试验后的自由长度 ... 61.65 mm (2.427 in)
- 外径 ... 20.5 mm (0.81 in)
- 试验力 ... 929.67 ± 46.50 N (209.0 ± 10.5 lb)
Caterpillar Information System:
C18 Fire Pump Engine Safety Messages
C18 Industrial Engine Inlet Manifold Pressure - Test
C18 Industrial Engine Electrical System
C18 Industrial Engine Cooling System
C18 Industrial Engine Air Inlet and Exhaust System
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Speed Sensor (Transmission) - Install
C18 Industrial Engine Electronic Control System Components
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Speed Sensor (Transmission) - Remove
C18 Industrial Engine General Information
3500B Generator Sets Engine Speed/Timing Sensor - Clean/Inspect
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Replace - Pressurizing Filter
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Control Manifold - Assemble
C18 Industrial Engine Fuel System
C9 Marine Engines and C9 Marine Generator Sets Drive Shaft
C9 Marine Engines and C9 Marine Generator Sets Flexible Coupling
2009/02/16 New Rocker Arms Are Available {1123}
2009/02/01 A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/02 A New Seal Is Used for the Ignition Transformers inG3600 Engines {1550, 7555}
CX31-P600 Petroleum Transmission Well Servicing Relief Valve (Torque Converter Inlet) - Remove and Install
3512B Generator Set Engine Diagnostic Trouble Codes
2009/02/02 Shims Are Now Used in the Carburetors of G3516 Engines {1266}
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Clean/Replace - Metal Sand Filters
2009/02/16 Disposable Paper Air Filters Require Protection {1051, 1054}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0588 - FMI 12