Heat Exchanger
Show/hide table
Illustration 1 | g00903274 |
Use the following procedure to tighten the bolts:
- Install guide studs in locations (5) and (6). Use three incremental steps to hand tighten bolt (1) through bolt (4).
- Remove the guide studs from locations (5) and (6).
- Install the spacers in locations (5) and (6).
- Tighten bolt (1) through bolt (10) in numerical order.
Torque ...
108 ± 7 N·m (80 ± 5 lb ft)
Caterpillar Information System:
G3500B Engines Air Lines
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1229 - FMI 08
C13 and C15 On-Highway Engines Starting the Engine
C9 Marine Engines and C9 Marine Generator Sets Exhaust Elbow - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Does Not Crank
2008/11/24 New Films are Available for Certain Generator Sets {7405}
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1229 - FMI 02
2008/11/24 Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
C9 Marine Engines and C9 Marine Generator Sets Drive Coupling - Remove and Install
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1227 - FMI 08
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1227 - FMI 04
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 05
C9 Marine Engines and C9 Marine Generator Sets Transmission Oil Lines - Remove and Install
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 06
120K and 120K Series 2 Motor Graders Machine Systems Blade Lift Cylinder - Remove and Install
793F CMD (Conversion) Off-Highway Truck Braking System MID 116 - CID 1232 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1232 - FMI 05
793F CMD (Conversion) Off-Highway Truck Braking System MID 116 - CID 1232 - FMI 06
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1273 - FMI 02
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08 Storage Procedures Exist for Caterpillar Products {1000, 7000}
2008/12/01 New Pressure Relief Valve {1251, 1715}
C18 Industrial Engine Diagnostic Trouble Codes